Conduit, Duct, & Raceway

6 Inches x 6 Inches Non-Metallic Wiresafe End Cap Pair of 2 UL NEMA 12 Rated

Category: Wireway Closure Plates

3 Inch Red EMT Conduit, Steel, 10 Foot Length

Category: Straight Colored Steel EMT Conduit

Panduct® type MC metric narrow slot wiring duct, 75mm W x 100mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

4x4 End Cap Slotless, Yellow

Category: 2-Piece Non-Metallic Raceway End Fittings

Carlon Egfn 4" X 4" Flange -

Category: Wireway Panel Adapters

3-1/2 Inch White EMT Conduit, Steel, 10 Foot Length

Category: Straight Colored Steel EMT Conduit

Lay-in Painted Galvanized 30-Degree Sweep Elbows are used for large radius turns. This 30-Degree Sweep Elbow Lay-in, F44T3R30SE item fits 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

3/4 Inch Rigid Steel 22-1/2 Degree Elbow

Category: Rigid 22-1/2° Conduit Elbows

CAR EGCIJ 2" X 2" INT COUPLING - WIREWAY

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F22TGV item fits 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Tee Fittings

CAB THRD1/2EZ THRD1/2EZ - 1/2"

Category: Threaded Rod

HOF LDR3P77 DIN3 STYLE RAILS

Category: Symmetrical Slotted DIN Rail

Lay-in Painted Galvanized 90-Degree Flush Tees used when flush mounting to vertical surface. This 90-Degree Flush Tee Lay-in, F44T3RT item fits 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Panduct® flush cover type D round hole wiring duct, 1 W x 2 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Feed-Through Swivel Nipples are used for adjusting wireway to different angles. This Swivel Nipple Feed-Through Box Entry, F66WSA item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Suspends 3000 Series Raceway from structural ceilings. Designed for use with 3/8" (9.5mm) threaded rod. Hangers should be installed no more than 5' (1.5m) apart along raceway run. This C-Hanger can be mounted back-to-back for double run of 3000 Series Raceway.

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

OFR Series, Inside Elbow, Steel. For Internal Right Angle Turns of OFR Series Raceway.

Category: Metallic Overfloor Raceway Elbows

Cable Tray, Ladder Type, Aluminum, 9" Spacing, 6" Wide, 12' Long

Category: Straight Cable Ladder Tray

Single gang one-piece deep outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.23in L x 3.48in W x 2.75in H (133.0mm x 88.5mm x 69.8mm). Breakou

Category: 1-Gang Raceway Device Boxes

Panduct® flush cover type D round hole wiring duct, 3 W x 4 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Cross Fittings are used when there are four branches of wireway. This Cross Fitting, F22X item fits 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Cross Fittings

Raceway Outlet Box, 1-Gang, Non-Metallic, Adhesive Backing, For use withT-70 and Twin-70 raceway only.y, 1.49" Height, 4.09" Length, 2.34" Width.. Color: Gray

Category: 1-Gang Raceway Device Boxes

Single gang one-piece outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.09"L x 3.34"W x 1.75"H (129.4mm x 85.0mm x 44.4mm). Breakouts for 1/2"

Category: 1-Gang Raceway Device Boxes

One Piece Surface Raceway, 3/4" W x 8' L, PVC, Office White, 160ft/Carton

Category: 1-Piece Non-Metallic Raceway