Conduit, Duct, & Raceway

Coupler fitting for use with LD3, LDPH3, and LDS3 raceway, Electric Ivory, ABS, Length 1.00 in.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Duct cover with protective film, .75 W x 6.' length, PVC, black. SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 24" (610mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 24" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB24BL bra

Category: Cable Tray Trapeze Hangers

Panduct® type NNC divider wall, 3.00" (75mm) nominal duct height, 2M lenght, halogen-free, white.

Category: Wall Duct Dividers

Type TNC slotted wall wiring duct, 37.1mm W x 35.8mm H, 6.6' length, polyphenylene ether + high impact polystyrene (PPE + HIPS), light gray, base and cover packaged together.

Category: Special Purpose Wire Duct

Panduct® type NNC halogen-free metric wiring duct, 100mm W x 72.4mm H x 2M length, halogen-free, light gray.

Category: Standard Density Wire Duct

Four way cross fitting for use with LD5, LDPH5, and LDS5 raceway, Off White, ABS, Length 4.05 in, Width 4.05 in. UL Listed.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type G wide slot wiring duct, 3 W x 5 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type FS solid wall wiring duct, 4 W x 1.5 H, 6' length, PVC, light gray.

Category: 2-Piece Non-Metallic Raceway

Outside corner fitting for use with LD10 raceway, International Gray, ABS, Length 1.5 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Right angle fitting for use with LDPH5 and LDS5 raceway, Electric Ivory, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Elbows

OCA COND1-W PVC CTD COND 1IN

Category: Straight PVC Coated Rigid Conduit

GRN SLOT Deep Strut

Category: Steel Back-To-Back Strut

SUP S251-38HDGC CANT BK-BK CH

Category: Steel Back-To-Back Strut

OCC ELL11/230-G 1-1/2"X30 GRAY PVC CTD ELBOW STL

Category: PVC Coated Rigid Conduit Elbows

SUP B1202W 10 SHALLOW STRUT WELDED BK-

Category: Steel Back-To-Back Strut

Shallow Strut, 12 Gauge, 1-5/8 Inch x 13/16 Inch, Length 10 Feet, Slotted Pre-Galvanized Steel w/ 7/16 Inch x 3 Inch Slots on 4 Inch Centers

Category: Steel Strut with Elongated Holes

SUP B1200HS 20HDG HS SHALLOW STRUT 12G

Category: Steel Strut with Elongated Holes

SUP H1200 20 Deep Strut 12GA 1-5/8X

Category: Steel Solid Strut

Snap-on vertical sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Inside corner fitting for use with LD10 raceway, International Gray, ABS, Length 1.88 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Tee fitting for use with LDPH3 and LDS3 raceway, Electric Ivory, ABS, Length 2.23 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Single gang two-piece screw together extension outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 4.99in L x 3.30in W x 1.00in H (126.7mm x 83.8mm x 25.4mm). Breakouts

Category: 1-Gang Raceway Device Boxes

OCC ELL1/2-B 1/2"X90 LBLUE PVC CTD

Category: PVC Coated Rigid Conduit Elbows