Connectors, Crimps, & Termination

SLK In-Line Breakaway, Crimp, Non-Fused, 1 Wire Line Side 6 - 14 AWG, 1 Wire Load Side 6 - 14 AWG, Thermoplastic Elastomer, Orange

Category: Luminaire Wire Disconnects

3MÖ Cold Shrink QT III 7600 T 3 RJS Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield« power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.

Category: Medium Voltage Indoor Cold Shrink

Ring Terminal, Large Wire, 4 AWG, 5/16" Stud Size

Category: Non-Insulated Ring Tongues

Inline Splice Kit, Cold Shrink, 25/28 kV, Shielded Cable, Conductor Range: 1 AWG - 250 MCM. Cable Insulation Range Size: 0.84" - 1.36", Connector Requirements: Minimum O.D.: 0.46", Maximum O.D.: 1.36", Maximum Length: AL/CU 4.00", Copper: 4.50".

Category: Medium Voltage Cold Shrink Splice Kits

Thin wall TFE heat shrink, 6 AWG (7.7mm) diameter, polytetrafluoroethylene (TFE), clear, 25 pc. package quantity.

Category: Thin Wall Heat Shrink

Compression Lug, Copper, 2-Hole, Long Barrel with Window, #2 AWG Wire, 1/2" Stud Hole, 1.75 Hole Spacing

Category: 2-Hole Long Barrel Copper Compression Lugs

310A 600V Distribution High SCCR 1-Pole Power Distribution Block 350kcmil-#4 Cu, to (12) #4-#12 Cu

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Rejacketing Sleeve, 15kV or Less, Shield Diameter Range: 0.60 - 0.80 Inch, 10 Foot Coil, Rejacketing Sleeves are Designed To Be Used In Conjunction With 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations.

Category: Cable Rejacketing Sleeves

Compression Lug, Copper, 1-Hole, Flex, 1/0 AWG Wire, 5/8 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Deadbreak Insulated Cap With Test Point and Ground, 600 Amp, 15/25 kV

Category: Loadbreak / Deadbreak Protective Caps

BUR YAZV4CTC12FX HYLUG, FLEX

Category: 1-Hole Copper Compression Lugs

Barrier Power Terminal Block, 600 V, 310 A, 3 Poles, 6 AWG to 350 kcmil Wire, Thermoplastic

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Ring Terminal, Vinyl Insulated, Funnel Entry, 8 AWG, 5/16 Inch Stud Size, 600 Volt, Red, Package of 200 Each

Category: Vinyl Insulated Ring Tongues

One-hole, standard barrel with window lug, 500 kcmil cable, 5/8 stud hole.

Category: 1-Hole Copper Compression Lugs

Insulated Ferrule, 18 AWG, .728 Inch Long, Tin Plated Copper, Red

Category: Single Insulated Ferrules

Polaris™ Insulated Multi-Tap Connector, 5 Port (Dual Sided Entry), 3/0 - 6 AWG, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Ring Terminal, Expanded Vinyl Insulated, 6 AWG, Stud: 1/4 Inch, Color: Blue, Material: Copper, Package of 200 Each.

Category: Vinyl Insulated Ring Tongues

Compression Lug, Copper, 1-Hole, Long Barrel, 600 kcmil Cable, 1/2" Stud Hole

Category: 1-Hole Long Barrel Copper Compression Lugs

Cad Haa-1l Cadweld #4 Cable to Horizontal Steel Surface

Category: Cable to Horizontal Steel - Surface Type

Mold,cable To Horz Stl,horz Tap On Surface

Category: Cable to Horizontal Steel - Surface Type

Tru-Break, Single-Phase, Retrofit, 27kV/12.5kA, 600 Amp Bushing, Single Phase, Includes: Ground Cable, Linkage Kit, Mounting Kit, Interrupter Handle, Interrupter Locking Arm, Insulating Plug with Cap and Stud.

Category: T-Body Deadbreak Connectors

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a blue, nylon housing. It has a tab size of 0.205/0.187 x 0.020" (5.2/4.7 x 0.5 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.78" (19.8 mm) long and 0.31" (7.9 mm) wide. The disconnect has a funnel entry configuration and a butted seam barrel. It comes in boxes of 1000.

Category: Female Nylon Insulated Wire Disconnects

Ring Terminal, Large Wire, 8 AWG, 5/16" Stud Size

Category: Vinyl Insulated Ring Tongues

THB TV14-6FL

Category: Vinyl Insulated Ring Tongues