Search results

Close Coupling Adapter. 600V Rated. For use with Type MS450 MMP & A30 & A40 Frame Contactors.

Category: Manual Motor Protector Connecting Links

34 Motor Current Amp, 50 General Purpose Amp, 600V Rated, 240V AC Coil. A-Line Series, A30 Frame, 3-Pole, IEC Contactor with 1 N.O. Auxiliary Contact Block.

Category: IEC Contactors - 38-65 Amp

15 - 45 Amp, Electronic Overload Relay, E45DU Frame, Selectable 10, 20 or 30 Trip Class. For use with A-Line, A26, A30 & A40 Frame Contactors. ***For use in 3-Phase Applications Only***

Category: Overload Relays - Electronic Type

Starter, Magnetic, NEMA Size 1, 3-Phase, 120 Volt AC Coil, 600 Volt AC, 27 Amp Rated, NEMA 1 Enclosure

Category: NEMA Size 1

Overload Relay, 200-Line Block, with Normally Closed Contact, for NEMA 3 Starters, Replacement for CR224E310F

Category: Overload Relays - Thermal Type

Contactor, Auxiliary, Side Mount, 2 Normally Open, CL/CK Contactors

Category: Definite Purpose Contactor Auxilliary Contacts

ABB X125-B2-48-ND

Category: Enclosed Softstarters

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 30 - 43. Type LPJ-SP or AJT Maximum Fuse: 70. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

ELECTRONIC RELAY 30-150A

Category: Overload Relays - Electronic Type

Enclosed Softstarter, 300 Hp @ 480V, 361 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 72”H x 72”W x 24”D.

Category: Enclosed Softstarters

The softstarter PSTX85-690-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating.

Category: Advanced Control Softstarters

Lug Kit for PST175 - PST300 Series Sofstarters. Wire Range: # 4 - 400 MCM (1 Per Phase).

Category: Starter & Contactors - Terminal Lug Kits

Conversion Kits, Electrically Held Contactors to a Mechanically Held Version, 24 Volt AC Coil, 3-Wire, 1-Pole Auxiliary Contact

Category: Lighting Contactor Mechanical Hold Kits

22 - 32 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic, Trip Class 10. Selectable Manual or Automatic Reset. For use with A-Line Series, A/AE/AF50 - A/AE/AF75 Frame Contactors.

Category: Overload Relays - Thermal Type

Terminal Shroud for Compression Lugs. For use with PSS175/300 - 300/515 & PST175 - 300 Series Softstarters and A/AF210 - A/AF300 Series Contactors.

Category: Softstarter Terminal Shrouds

PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 104 FLA (Full Load Amps). Heavy Duty: 80 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass.

Category: Advanced Control Softstarters

PSTX AnyBus Adapter, DEVICENET

Category: Softstarter Communication Adapters

Softstarter PSTX30-690-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

(3) Terminal Lugs. Wire Range: 2/0 - 500 MCM. For use with AF Series, AF580 - AF1250 Frame Contactors. (Set of 3 lugs w/ 3 2/0-500mcm holes)

Category: Starter & Contactors - Terminal Lug Kits

Softstarter PSTX142-690-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSR Series Softstart (Compact style). 34.0 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA42 Series Overload Protection & DB80 Series Mounting Kit.

Category: Basic Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 142 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 14.8" W: 7.8" D: 9.3" Weight: 15Lbs. 8 Inch Width, 15 Inch Height, 11 Inch Depth ** Qty 2 OF ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

PSR Series Softstart (Compact style). 46.2 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA75 Series Overload Protection & DB80 Series Mounting Kit.

Category: Basic Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 15" W: 17" D: 15" Weight: 103Lbs. 36 Inch Width, 60 Inch Height, 16 Inch Depth ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters