Softstarters & Accessories

SOFT STARTER ALTIVAR SOFT STARTER ATS490 790A 208 TO 690V AC CONTROL SUPPLY 110 TO 230V AC

Category: Basic Control Softstarters

ALB 150-F201NBRB SMC FLEX SMA

Category: Advanced Control Softstarters

AB 150-F25NBRB CONTROLLER MOTOR

Category: Advanced Control Softstarters

Motor Management, TeSys T, motor controller, Ethernet/IP, Modbus/TCP, 6 inputs, 3 outputs, 1.35 to 27A, 100 to 240 VAC

Category: Softstarter Protective Modules

SOFT STARTER ALTIVAR SOFT STARTER ATS490 32A 208 TO 690V AC CONTROL SUPPLY 110 TO 230V AC

Category: Basic Control Softstarters

SOFT STARTER ALTIVAR SOFT STARTER ATS490 75A 208 TO 690V AC CONTROL SUPPLY 110 TO 230V AC

Category: Basic Control Softstarters

MODBUS END ADAPTER SCREW TERM 120 OHM

Category: Softstarter Communication Adapters

ALB 150-F251NBRB SMC FLEX SMA

Category: Advanced Control Softstarters

Extension module, TeSys T, 4 inputs, 24VDC, for LTMR controller

Category: Softstarter Communication Adapters

SOFTSTARTER ATS480 208 - 690V AC 660A

Category: Basic Control Softstarters

Terminal Shroud for Compression Lugs. For use with AF190 - AF205 Series Contactors. Includes: 2 Shrouds.

Category: Softstarter Terminal Shrouds

PSR Series Softstart (Compact style). 104 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA75 Series Overload Protection & DB80 Series Mounting Kit.

Category: Basic Control Softstarters

Softstarter PSTX300-600-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

Softstarter PSTX105-690-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

The softstarter PSTX85-690-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating.

Category: Advanced Control Softstarters

Enclosed Softstarter, 300 Hp @ 480V, 361 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 72”H x 72”W x 24”D.

Category: Enclosed Softstarters

S611 Series Solid-State Soft Starter. Control Voltage: 120V AC. Load Voltage: 600V AC, 414 Amp, 207 - 414 FLA (Full Load Amps), Non-Combination, Standard Duty, 300% Current or 15 Seconds, 115% Continuous. Hp Ratings: 150 @ 208V, 150 @ 240V, 350 @ 480V, 450 @ 600V. Includes: Overload Protection, Bypass, Serial Modbus Communication. ***Must add (2) Lug Kits***

Category: Basic Control Softstarters

S611 Series Solid-State Soft Starter. Control Voltage: 120V AC. Load Voltage: 600V AC, 180 Amp, 90 - 180 FLA (Full Load Amps), Non-Combination, Standard Duty, 300% Current or 15 Seconds, 115% Continuous. Hp Ratings: 60 @ 208V, 60 @ 240V, 150 @ 480V, 150 @ 600V. Includes: Overload Protection, Bypass, Serial Modbus Communication. ***Must add (2) Lug Kits***

Category: Basic Control Softstarters

Terminal Shroud, Long and Deep, 3-Pole

Category: Softstarter Terminal Shrouds

Lug Kit, 6 AWG - 300 MCM, For use with S611 Series Frame B, 99 - 125 Amp Softstarters. Includes: 3 Lugs that can be used on the Line Side or Load Side.

Category: Softstarter Lug Kits

PSTX AnyBus Adapter, DEVICENET

Category: Softstarter Communication Adapters

MECHANICAL LUG KIT FOR 14 AWG - 2/0 AWG FRAME A 52A - 77A

Category: Softstarter Lug Kits

Solid State Controller, SMC-Flex, Open, 85 Amp, 15 - 60 Horse Power @ 460 Volt AC, 24 Volt Ac/DC Control Volt, Pump Control Option

Category: Advanced Control Softstarters

Softstarter PSTX30-690-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters