Timing Relays

Relay, Timing, Repeat Cycle, 8 Pin, 24 Volt AC/DC, Power On, Repeat Cycle, Off Start Cycle, 1.0 to 100 Seconds, Both Delays

Category: 8-Pin Timing Relays

TUBE BASE TIMING RELAY

Category: 8-Pin Timing Relays

SPDT 24-240V Timing Relay 7-Function Programmable

Category: DIN Rail Mount Timing Relays

Modular timing relay, Harmony, 8A, 1CO, 1s..100h, off delay, 24V DC 24...240V AC DC

Category: DIN Rail Mount Timing Relays

ADJUSTABLE TIME DELAY RELAY FOR MN VOLTAGE RELEASE 100/130 VDC 100/130 VAC 50/60 HZ

Category: DIN Rail Mount Timing Relays

ABB 1SVR508100R0100 CT-ERC.22

Category: DIN Rail Mount Timing Relays

Time Delay Relay, AC, 4 Form C 4PDT-CO, 10 A Contact Rating, Chassis Mount, 75 °C [167 °F]

Category: DIN Rail Mount Timing Relays

ALB 700-HT22CA2 TUBE BASE TIM

Category: 11-Pin Timing Relays

11 Pin, Timing Relay, 240V Rated, 10 Amp, DPDT. 12-240V AC/DC Coil, Range: 0.1 Sec. to 9,990 Hours. TMRP Series. Control Switch Trigger. 10 Timing Functions Included; ON Delay (Power Triggered), Single Shot Leading Edge Voltage Controlled, OFF Delay/Signal OFF Delay, Single Shot Leading Edge with Control Input, Flasher (Pause First), Retriggerable Single Shot, Flasher (ON First), ON/OFF Delay, Single Pulse Generator and Memory Latch.

Category: 11-Pin Timing Relays

Time Delay & Timing Relays DIGI-SET(D.O.M.)

Category: 8-Pin Timing Relays

Abb; Electronic Time Relay; Ct-erd 12, On-delay; Timing Range: 05 S - 100 Hr; Coil: 24 - 240 Vac, 24 - 48 Vdc; Contact Configuration: 1 C/o; Contact Rating: 250v, 6 Amp; Mounting: Din Rail (en 60715), Snap-on; Connection: Fine Strand With Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Fine Strand Without Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Rigid: (2) 20 - 16 Awg/(1) 20- 12 Awg; Enclosure: Ip50 (enclosure), Ip20 (terminal); Size: 0.69 In Width X 2.76 In Heightx 2.28 In Depth; Operating Cycles: Mechanical Switching: 30000000 Cycles, Electrical Switching: 100000 Cycles; Operating Temperature: -20 To +60 Deg C; Environmental Conditions: Storage Temperature: -40 To 85 Deg C, Damp Heat: 95 Pct Rh; Switching Current: 100 Milamp Minimum; Switching Current: 6 Amp At 230 Vac (resistive), 3 Amp At 230 Vac (inductive), 6 Amp At 24 Vdc (resistive), 2 Amp At 24 Vdc(inductive); Recovery Time: Less Than 50 Ms; Accuracy: Less Than 005 Pct Withinthe Rated Control Supply Voltage, Less Than 06 Pct Within The Temperature Range;amperage Rating: 53.52 Milamp At 115 Vac, 61.1 Milamp At 230 Vac, 14.7 Milamp At24 Vdc; Output Circuit: 15-16/18; Indicator: Green LED For Supply Voltage, Yellow LED For Relay Status; Stripping Length: 7 Mm; Contact Material: Cd-free; Tightening Torque: 0.5 - 0.8 N-m; Switching Voltage: 12 V Minimum

Category: DIN Rail Mount Timing Relays

T-REL MULTI-F 1CO 12-240VAC/DC

Category: DIN Rail Mount Timing Relays

IDC GT3A-4AF20 11-PIN ANALOG TIMER

Category: 8-Pin Timing Relays

IDC GT3A-2AF20 8 PIN ANALOG TIMER

Category: 8-Pin Timing Relays

Timing Relay, Microprocessor-Timer/Counter, 10 Amp, DPDT, 120 Volt AC/DC Count/Inhibit Input, 120 Volt AC Coil

Category: DIN Rail Mount Timing Relays

Timing Relay, 120 Volt AC Coil, On Delay, 8-Pin, 0.1 - 102.3 Second, 0.1 Increments

Category: 8-Pin Timing Relays

Relay, Time Delay, Release, Digital Adjustment, 10 - 28 Volt AC/DC, 0.1 to 102.3 Second Delay, Double Pole, Double Throw, 10 Amp, Resistive Contacts

Category: 11-Pin Timing Relays

Relay, Time Delay, Digital Adjustment, 40 - 260 Volt AC/DC, 1 to 1023 Minute Delay, Double Pole, Double Throw, 10 Amp, Resistive Contacts

Category: 8-Pin Timing Relays

Timing Relay, Off Delay, 120 Volt AC, 0.1 - 10 Seconds, 11-Pin, Knob Adjustment, Type CK

Category: 11-Pin Timing Relays

ORN H5CXANAC100240 TERMINAL STYLE

Category: 11-Pin Timing Relays

EGL CX202A6 RESET TIMER

Category: DIN Rail Mount Timing Relays

FDR 85.02.0.024.0000

Category: 11-Pin Timing Relays

TIMER MULTIFUNCTION SINGLE POLE CO 10A 0.1S-10D 24-350VDC 24-265VAC SUPPLY 10 FUNCTION DINRAIL MOUNT

Category: DIN Rail Mount Timing Relays

Timing Relay, Economy, Off Delay, Single Pole, Double Throw, 0.05 Seconds to 10 Hours, 6 Settings, 24 - 48 Volt DC, 24 - 240 Volt AC

Category: DIN Rail Mount Timing Relays