Raceway - Non-Metallic

Outside corner fitting for use with LDPH3 and LDS3 raceway, Off White, ABS, Length 1.05 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Wall Duct Fitting, T-Unit, Surface Cover

Category: 2-Piece Non-Metallic Raceway Tee Fittings

InfoStream Multi-Channel Raceway Flat Elbow, PVC, Office White

Category: 1-Piece Non-Metallic Raceway Elbows

Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD3, LDPH3, and LDS3 raceway, Electric Ivory, PVC, Length 0.81 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD3, LDPH3, and LDS3 raceway, Off White, PVC, Length 0.81 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Used to limit the bend of the fiber cable to 2 (50.4 mm) when exiting from 4x4 FiberRunner® Channel or a FiberRunner® Horizontal Tee, Black.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Optional split cover for the four way cross fitting FRFWC12X4W6YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Orange, 1 piece.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

24 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Yellow.

Category: 1-Piece Non-Metallic Raceway End Fittings

Optional split cover for the outside vertical right angle fitting FROVRA6X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

One-piece latching surface raceway available in 6'. Supplied with pre-applied adhesive backed tape.

Category: 1-Piece Non-Metallic Raceway

Fire box adapter for use with LD5/LDPH5 profile raceway.NOTE: For low voltage applications only, International Gray, ABS, Length 2.00 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type FS solid wall wiring duct, 3 W x 5 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Outside corner fitting. Used to join sections of Twin-70 raceway at outside corners. White.

Category: 1-Piece Non-Metallic Raceway Elbows

Attaches to 12x4 channel and/or fittings to create at a horizontal four way cross intersection with two 6x4 exits. Accepts optional split cover FRFWCSC12W6BL.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Attaches to 12x4 channel and/or fitting to create a 45° downward angle from a straight horizontal run. Used with inside vertical 45° angle fitting FRIV4512X4YL to change level of a horizontal run. Accepts optional split cover FROV45SC12YL.

Category: 1-Piece Non-Metallic Raceway Elbows

Coupler fitting for use with LD5, LDPH5, and LDS5 raceway, International Gray, ABS, Length 1.00 in.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Reducer fitting for use with LD3, LDPH3, LDS3, LD5, LDPH5 and LDS5 raceway. For in-line terminations, use with CFX5, Off White, ABS, Length 1.00 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Tamper resistant two-channel, one-piece latching surface raceway, PVC, White, Supplied with factory applied adhesive tape, 10' length. Color: White. Sold by foot in increments of 10.

Category: 1-Piece Non-Metallic Raceway

Backfeed fitting insert. Removable and maintains bend radius control.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Reducer fitting for LD raceway from size 5 to size 3. For use with LD5 and LD3 raceway. For in-line terminations, use with CF5, Off White, ABS, Length 0.85 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Attaches to 6x4 channel and/or fittings to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FROVRA6X4YL to change level of a straight horizontal run. Includes split cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Optional split cover for the four way cross fitting FRFWC12X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Attaches to 4x4 channel and/or fittings to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts FTR4X4OR, FIDT4X4BL, S4X4OR6 or E4X4OR6 directly. Accepts optional snap-on cover FRHC4OR6 in conjunction with channel.

Category: 1-Piece Non-Metallic Raceway Elbows