Search results

Snap-On End Section. Type: FED5.I.3L. Color: Gray. Used with Angled Spring Connection Terminal Blocks Type: D 2,5/5.I.3L.

Category: Terminal Block End Sections

Abb 0115-338.25 Dist Term Blk

Category: Terminal Strips

Terminal Markers For Use With ABB SNA DIN Rail Terminal Blocks

Category: Terminal Block Marking Strips

Self Adhesive Strip, SAT5, SNK Series.

Category: Terminal Block Marking Strips

Power Distribution Terminal Block, 175A, Line: 8 - 2/0 AWG, Load: 14 - 4 AWG, Wall or DIN Rail Mount.

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Terminal Block Markers Pre-printed 21-30 (x10), Horizontal.

Category: Terminal Block Horizontal Marking Cards

Marking Cards, 1 - 100, Vertical, White with Numbering, RC510, 5 Millimeter x 10 Millimeter

Category: Terminal Block Vertical Marking Cards

AB 1SNK505911R0000 ES6-4S END

Category: Terminal Block End Sections

RC810, Vertical Mount, (100) Marking Cards, Legend: 1 - 100. For use with 8 mm Terminal Blocks.

Category: Terminal Block Vertical Marking Cards

Distribution Block, Inputs 1 x 6-2/0 AWG and 1 x 10-6 AWG Outputs 6 x 14-6 AWG, 160 Amp, Feed Through, Screw Clamp, Din Rail Mount/Panel Mount

Category: Multiple Primary / Multiple Secondary Non-Insulated Distribution Blocks

RC510, Horizontal Mount, (10) Marking Cards, Legend: 21 - 30. For use with 5 mm Terminal Blocks.

Category: Terminal Block Horizontal Marking Cards

Abb 0290-094.21 fuse Block

Category: 2.5mm Fuse Holder Terminal Blocks

Heavy Duty Switch Terminal Block with Blade. Compression Clamp. Type: M 4/6.SNB. Color: Gray/Orange. 300V/10A. Size: 4 mm Block, 6 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 10 AWG.

Category: Heavy Duty Switch Terminal Blocks

Distribution Block, Inputs 1 x 8-2 AWG and 1 x 10-6 AWG Outputs 6 x 14-6 AWG, 115 Amp, Feed Through, Screw Clamp, Din Rail Mount/Panel Mount.

Category: Multiple Primary / Multiple Secondary Non-Insulated Distribution Blocks

Rated Cross-Section: 2.5 mm² Spacing: 5.08 mm Connection Type: Screw clamp Function: Female Plugs Connecting Capacity Main Circuit: Screw Clamp / Flexible 1x 0.22 ... 2.5 mm² Screw Clamp / Rigid 1x 0.2 ... 4 mm² Rated Current (I ): Main Circuit 12 A Rated Short-time Withstand Current (I ): for 1 s 300 A Rated Voltage (U ): 250 V Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20 Insulation Material: Polyamide Wire Stripping Length: 7.5 mm Recommended Screw Driver: 3.5 mm Tightening Torque: acc. IEC 60947-1 0.5 N·m Manufacturer 0.8 N·m

Category: Terminal Block Test Plugs

Terminal Block End Stop, BAM2, Light Gray, with Screws, DIN 3End Stop for Terminal Strips, with Screws for DIN 3, light Gray, Type BAM2, 10 Millimeter, 50 per Package stop Light Grey *** Discontinued ***

Category: Terminal Block End Stops

Timing Relay, Off-Delay, Multi Range, 1 - 1023 Seconds, 8-Pin, SPDT, 24 Volt AC

Category: 8-Pin Timing Relays

Abb 0231-002.25 Rc510 Hor 1-1 0 Number Card

Category: Terminal Block Horizontal Marking Cards

Assembled Jumper Bar without IP20 Protection. 10 Pole. 24 Amp. Type: BJM5. Used with 2.5 mm Blocks.

Category: Terminal Block Jumper Bars

Rc610 Terminal Block Markers Pre-printed Marker Horizontal 101-200

Category: Terminal Block Horizontal Marking Cards

Feed Through Terminal Block. Double - Deck with 1 Feed - Through Circuit. Screw Clamp. Type: ZS4-D1. Color: Gray. 300V/20A. 5.2 mm Spacing. DIN 1 - DIN 3. Wire Size: 24-12 AWG.

Category: Double Deck Feed Through & Ground Terminal Blocks

Assembled Jumper Bar without IP20 Protection. 10 Pole. 24 Amp. Type: BJM5D. Used with 2.5 mm Blocks.

Category: Terminal Block Jumper Bars

Spring Connection Terminal Block. Type: D 4/6.P.2L. Color: GREEN & YELLOW. 600V/25A. Size: 4mm² Block, 6 mm Spacing. DIN 3. Wire Size: 24 - 10 AWG.

Category: Spring Connection Terminal Blocks

RC55, Horizontal Mount, (10) Marking Cards, Legend: 1 - 10. For use with 5 mm Terminal Blocks.

Category: Terminal Block Horizontal Marking Cards