Search results

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

Plastic snap-in icon with data image, Red, 100 pc.

Category: Snap-In Wallplates

Category 5e, RJ45, 8-position, 8-wire spring shuttered universal jack module. White.

Category: Snap-In Cat 5e Jack Inserts

Category 6, RJ45, 8-position, 8-wire shielded spring shuttered universal jack module. Red.

Category: Snap-In Cat 6 Jack Inserts

Thermal transfer raised panel component label, 4.00" W x 1.00" H, raised panel, green, 1 labels/row, 500 pc. package quantity.

Category: Permanent Labels

Corrugated loom tubing slit wall, .62" x 100' polyethylene, yellow.

Category: Split Wall Loom Tubing

Dome-Top® barb ty cable tie, standard cross section, 15.1 (384mm) length, heat stabilized nylon 6.6, natural.

Category: Non-Releasable Cable Ties

Cut-off accessory. Use this accessory with GS4MT tool to cut MBH or MBS continuous banding. Accessory drops in place for use.

Category: Cable Tie Tools

Module supplied with one LC (keyed C green) SFF duplex fiber optic adapter with zirconia ceramic split sleeves.

Category: Snap-In Blank Inserts

Thermal transfer component label, 1.00" W x 0.38" H, adhesive polyester, white, 7 labels/row, 140 labels/sheet, 5000 labels/package.

Category: Permanent Labels

1/3 insert with 15-pin high density female to female coupler, SVGA capable, electric ivory.

Category: Multimedia Outlet System Wallplate Inserts

Corrugated loom tubing slit wall, .75" (19.1mm) x 2000' (609.6m), polyethylene, black.

Category: Split Wall Loom Tubing

Used to seal off 3.5" x 5" cabinet top openings. Can also be used to add the CTGN3X5 to openings where the snap-on cover has been removed. For use with Net-Access™ Cabinets. Color: Black

Category: Indoor Free Standing Data, Audio, & Video Enclosures

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Category: Mounting Hardware & Brackets

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with tw

Category: Mounting Hardware & Brackets

Contact aid for copper-to-copper and copper-to-steel connections, 8 oz. Operating temperature range -40°F (-40°C) to 350°F (177°C). Good for all voltages and suitable for grounding. Also used for anti-seizing thread lubricant.

Category: Oxide Inhibitor

Thermal transfer component label, 2.00" W x 0.38" H, polyester, white, 1 label/row, 5000 pc. package quantity.

Category: Permanent Labels

Module supplied with 75 ohm industry standard BNC coupler, Green.

Category: Snap-In Blank Inserts

1/3 insert with 9-pin female to female coupler, electric ivory.

Category: Multimedia Outlet System Wallplate Inserts

Thermal transfer component label, 1.50" W x 0.75" H, vinyl cloth, white, 1 labels/row, 5000 pc. package quantity..

Category: Permanent Labels

Category 6, RJ45, 8-position, 8-wire spring shuttered universal jack module. White.

Category: Snap-In Cat 6 Jack Inserts

Thermal transfer raised panel component label, 3.79" W x 0.30" H,white, 1 label/row, 500 pc. package quantity.

Category: Permanent Labels

Laser/ink jet component label, 0.75" W x 0.50" H, adhesive polyester, white, 9 labels/row, 153 labels/sheet, 10,000 labels/package.

Category: Permanent Labels

2 fiber OS2, LC duplex to LC duplex patch cord, riser (OFNR) rated, 16mm jacketed cable, Std IL 17 meters

Category: Fiber Optic Patch Cords