Search results

Dome-Top® BC4LH-S25-L0 Locking Clamp Barb Tie, Blk, UV PA6.6, M6, 15.5"L, 120lb

Category: Screw Mount Cable Ties

Wiring Duct, Type G, Wide Slot, 3/4 Inch Wide x 1-1/2 Inch Deep x 6 Foot Long, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

OptiCam ST Fiber Optic Multimode Connector, OM1, Beige

Category: ST Fiber-Optic Connectors

Wallplate, Vertical, with Labels, 1-Gang, 2-Port, Box Mount, NetKey, Off White

Category: Snap-In Wallplates

Ring Terminal, 16-14 AWG, 5/16" Stud Size, Vinyl Insulated, Funnel Entry, Pack of 100

Category: Vinyl Insulated Ring Tongues

Wiring Duct, Type G, Wide Slot, 1-1/2" W x 1-1/2" H x 6' L, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduit DNF18-250FIB-M Female Disconnect

Category: Female Nylon Insulated Wire Disconnects

Cable Tie Mount, .86", #8 (M4) Screw Applied, Nylon, Natural, Pack of 100

Category: Cable Tie Bases

Mini-Com® surface mount box accepts up to one Mini-Com® Modules. Dimensions: 0.90"H x 1.03"W x 1.89"L (22.80mm x 26.3mm x 48.1mm), Off White.

Category: Surface Mount Data, Video, & Audio Housings

The vibration resistant male disconnect is made of copper and is nickel-plated. It is barrel insulated in yellow vinyl housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm¦). It is 0.98" (24.9 mm) long and 0.25" (6.4 mm) wide. The disconnect has a funnel entry barrel configuration and a brazed seam barrel. It comes in bottles of 50.

Category: Male Vinyl Insulated Wire Disconnects

Cable Tie, Standard Cross Section, 7.4" Long, TEFZEL, Aqua, 1000/Pack

Category: Non-Releasable Cable Ties

48-Port Patch Panel, Keystone, 2RMU, Black, Stainless Steel, Flat

Category: Unloaded Keystone Patch Panels

Drop wire and threaded rod clip mount.

Category: J-Hook From Wire/Rod & Beam

The single wire DIN end sleeve insulated ferrule in turquoise has a funnel entry for faster insertion and lower installation cost. It is intended for American Wire Gauge (AWG) #24-22 (0.34mm²) wire ferrules and supports a maximum wire insulated diameter o

Category: Single Insulated Ferrules

Corrugated loom tubing slit wall, .62" x 100' heat stabilized black nylon 6.

Category: Split Wall Loom Tubing

Vinyl Adhesive Sign, Warning Header, 3.5" H x 5.0" W (88.9mm x 127.0mm), 'Arc Flash & Shock Hazard, Appropriate PPE Required' with Detailed Write-On Area, Orange Header and Black/White, 1 Sign/Card, 5 Cards/Package.

Category: Arc Flash Hazard Labels

#6 AWG (16mm²) jumper for armored cable diameter up to 0.84 (21.3mm), 24 (609.6mm) length, factory terminated on one end with LCC6 two-hole copper compression lug and the other end with grounding terminal, provided with two each #12-24 and M6 thread-formi

Category: Bonding Jumpers

Narrow Slot Wiring Duct, Lead-Free PVC, Black, Size: 4 Inch Wide, 4 Inch Deep, 6 Foot Long, .20" Slot Width, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Voltage marker, 4.5" W x 1.13" H, '208 Volts' (legend), polyester, black/orange, 4/card. PCV-208BY replaces PCV-208B

Category: Voltage Markers

The thermal transfer self-laminating adhesive label is made of vinyl is supplied on a roll with 2 labels per row. The label has a white colored print-on area 1.5" (38.1 mm) high for 1/0 - 250 wires and a clear overlaminate. It is 2.0" wide and 6.5" long

Category: Self-Laminating Labels

Push Rivet Low Profile Cable Tie Mount, 0.144" (3.7 mm) Hole, Nylon 6.6, Red, Package of 1000

Category: Cable Tie Bases

ThermTrans, Heat shrink Tubing, Mil Grade, White, 3/8 Inch Diameter Polyolefin, 500/roll.

Category: Heat Shrink Wire Marker Labels

Wire Marker Card, Vinyl Cloth, 'L2'

Category: Wire Marker Cards

Cable Tie, Intermediate, 5.6" Long, Heat Stabilized Nylon, Black, 100/Pack

Category: Non-Releasable Cable Ties