Wire Duct Clips / Retainers

PANTHER INDUSTRIES 3/4IN X 10FT 24GA GALV HANGER IRON COIL

Category: Wire Duct Clips / Retainers

2" Corner Strip For PanelMax™ DIN Rail Wiring Duct

Category: Wire Duct Clips / Retainers

Panduct® PanelMax™ Corner Strip For DIN Rail Wiring Duct, 3" Corner Strip, PVC, Light Gray

Category: Wire Duct Clips / Retainers

Panduct® PanelMax™ Corner Strip For DIN Rail Wiring Duct, 4" Corner Strip, PVC, Light Gray

Category: Wire Duct Clips / Retainers

Intersection Bend Radius Control, 2" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 2.0" (50 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET TRAPEZE 12IN EZ EA

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 4.0" (102 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 2.0" (50 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET TRAPEZE 12IN EZ EA

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 4" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

OVERHEAD WALL MOUNT 18-30IN EZ EA

Category: Wire Duct Clips / Retainers

The electro zinc-plated vertical wall mount bracket in silver is .33" (8.4 mm) high, 1.5" (38.1 mm) long, and 1.69" (42.9 mm). It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

OVERHEAD SPLCONNECTOR 24IN -30IN EZ EA

Category: Wire Duct Clips / Retainers

The black powder coated bracket strut mounting clip assembly in black is 2.27 (57.7 mm) high, 6.50 (165.1 mm) long, and 1.96 (49.8 mm) wide. It allows the Wyr-Grid ® Pathway to be attached directly to standard 1.63 (41.4) wide strut structures. The packag

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 6.0" (152 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated straight splice connector is 1.57" (39.8 mm) high, 4.67" (118.5 mm) long, and 1.12" (28.5 mm) wide. It quickly joins two 24" (610 mm) or 30" (762 mm)] wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the pai

Category: Wire Duct Clips / Retainers

OVERHEAD STRUT KIT EZ EA

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 21.0" (533.4 mm) long, 2.04" (51.8 mm) wide, and 21.0" (533.4 mm) deep. It is designed to support an 18" (457.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers

OVERHEAD SIDEWALL 6IN H EZ EA

Category: Wire Duct Clips / Retainers

The black powder coated wall bracket is 2.44" (61.98 mm) high, 6.05" (153.67 mm), long, 3.12" (79.25 mm) wide, and 6.05" (153.67 mm) deep. It is used to support the end of the 18" (457.2 mm), 24" (609.6 mm), or 30" (762 mm) Wyr-Grid® Pathway against a wa

Category: Wire Duct Clips / Retainers

OVERHEAD SPLCONNECTOR 12IN -18IN EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET CANTILEVER 18IN EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD INTERSECTION SPLICE EZ EA

Category: Wire Duct Clips / Retainers

The flat, pre-galvanized metal liner in gray is 12" (304.8 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers