Search results

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Light Gray.

Category: Wireway Elbows

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Light Gray.

Category: Wireway Elbows

Type NC halogen-free wiring duct cover, 37mm W x 2M length, halogen-free, light gray.

Category: Wire Duct Covers

Channel, Slotted Wall, 2" x 2" (50mm x 50mm), 6', Fiber-Duct, Orange, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type F narrow slot wiring duct, 4 W x 3 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Duct cover with protective film, 4 W x 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

4in x 4in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Black.

Category: Wireway U-Connectors

Used for closing off open ends of the 4x4 hinged channel. No coupler required. Push-on installation.

Category: Wireway Closure Plates

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4LG, S4X4LG6 or E4X4LG6 directly.

Category: Wireway Elbow-Tee-Cross Fittings

Type NC halogen-free wiring duct cover, 100mm W x 2M length, halogen-free, light gray.

Category: Wire Duct Covers

Intersection Bend Radius Control, 4" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 4.0" (102 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

Electro zinc plated Wyr-Grid® 6" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

OVERHEAD SIDEWALL 2IN H EZ EA

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2"" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in s

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 12" (304.8 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in

Category: Wire Duct Clips / Retainers

The black powder coated bracket is made of steel and is 2.44" (61.98 mm) high, 6.05" (153.67 mm), long, 3.12" (79.25 mm) wide, and 6.05" (153.67 mm) deep. It is used to support the end of the 8.0" (203 mm) Wyr-Grid® Pathway against a vertical surface suc

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 28.5" (723.9 mm) long, 2.04" (51.8 mm) wide, and 28.5" (723.9 mm) deep. It is designed to support a 24" (609.6 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod d

Category: Wire Duct Clips / Retainers

Panduct® type G wide slot wiring duct, 4 W x 4 H, 6' length, PVC, adhesive, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

1" bend radius corner strip pre-cut for 2" wall height.

Category: Wireway Elbows

Cut-to-size 6 foot corner strip with a 1" bend radius.

Category: Wireway Elbows

6 foot length is cut by user to fit duct height, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct