Wire Duct, Wire Trough, Wireway

Duct cover, 100mm W x 2M length, PVC, RAL 7030 grey.

Category: Wire Duct Covers

Duct cover, 62mm W x 2M length, PVC, RAL 7030 grey.

Category: Wire Duct Covers

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Yellow.

Category: Wireway Elbows

Panduct® flush cover type D round hole wiring duct, 2 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 1.5 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2OR or FIVRA4X4OR to change level of straight horizontal runs. Cover included.

Category: Wireway Elbows

4in x 4in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Yellow.

Category: Wireway U-Connectors

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Orange.

Category: Wireway Elbows

Panduct® type MC metric narrow slot wiring duct, 37mm W x 62mm H x 2M length, PVC, white.

Category: Standard Density Wire Duct

2 x 2 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Light Gray.

Category: Wireway Closure Plates

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4OR, S4X4OR6 or E4X4OR6 directly.

Category: Wireway Elbow-Tee-Cross Fittings

Solid Wall Raceway used in non-plenum applications. Base and covers sold separately, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® type G wide slot wiring duct, 1 W x 1.5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 24" (609.6 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 26.7" (678.2 mm) long, 2.2" (56.4 mm) wide, and 26.7" (678.2 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The flat, pre-galvanized metal liner in gray is 12" (304.8 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

Narrow Slot Wire Duct. H x W x L: 4" x 1" x 6'. Color: White. 5mm Slots, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

6X4IN NARROW SLOT GRY DUCTWiring Duct Narrow Slot 6 Inch X 4 Inch Rigid PVC Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Duct cover, 100mm W x 2M length, PVC, white.

Category: Wire Duct Covers

Panduct® type F narrow slot wiring duct, 3 W x 1 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® type F narrow slot wiring duct, 1 W x 1 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 1 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Panduct® type F narrow slot wiring duct, 1.5 W x 4 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Duct cover, 50mm W x 2M length, PVC, RAL 7030 grey.

Category: Wire Duct Covers

Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channel, spilling over the side into a 2x2 vertical exit. Requires coupler to attach 2x2 FiberRunner® and fittings to the vertical exit. Mounts directly to existing installation with no alteration requir

Category: Wireway Box Connectors