Search results

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2BL or FIVRA4X4BL to change level of straight horizontal runs. Cover included.

Category: Wireway Elbows

Panduct® type FS solid wall wiring duct, 4 W x 5 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Used to carry the cables throughout the Fiber-Duct Routing System. Accepts cover C2BL6. Cover sold separately.

Category: Straight Channel Cable Tray

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway, Non-Metallic, .88" x 1.71" x 6', Office Gray

Category: 1-Piece Non-Metallic Raceway

OVERHEAD SIDEWALL 4IN H EZ EA

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Pathway Section protects cables between the Main Distribution Area and the Equipment Distribution Area. Unlike other pathways, it installs quickly and can be modified easily, optional sidewalls snap on without extra hardware or tools. Splice

Category: Straight Wire Basket

Panduct® snap-clip mounting bracket for use with types G,F,FS and D wiring duct, #8-32 x 1/4 (provided) screw required, 1.50" duct width, spring steel, metallic, 100 pc. package quantity.

Category: Wireway Support Hangers

The flat, pre-galvanized metal liner in gray is 24" (609.6 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET TRAPEZE 18IN EZ EA

Category: Wire Duct Clips / Retainers

Inside corner fitting for use with LD3 raceway, International Gray, ABS, Length 1.38 in.

Category: 1-Piece Non-Metallic Raceway Elbows

T-45 reducer fitting to LD10 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Elbows

Panduct® type HN hinged cover narrow slot wiring duct, 4 W x 4 H, 6' length, PVC, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 1 W x 1 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Inside corner fitting – non-adjustable. Used to join sections of TG raceway at inside corners. Electric Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

Inside corner fitting. Used to join sections of Twin-70 raceway at inside corners. Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Single gang two-piece power rated low profile snap together outlet box. Includes 20A U.S. style 106 duplex electrical outlet. For use with Pan-Way« LDPH3, 5, 10 or LDS3 or 5 profile raceway only. 4.84"L x 2.90"W x 1.22"H (122.9mm x 73.6mm x 30.9mm), Off-White.

Category: 1-Gang Raceway Device Boxes

Reducer fitting for LD raceway from size 10 to size 5. For use with LD5 and LD10 raceway. White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type F narrow slot wiring duct, 2 W x 2 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Outside Vertical Right Angle Fitting, Fiber-Duct, Yellow

Category: Wireway Elbows

Two channel tamper resistant one-piece latching surface raceway. Supplied with pre-applied adhesive backed tape. Available in 8' and 10' lengths.

Category: 1-Piece Non-Metallic Raceway

TG-70 raceway base, 10 meter lenght. Supplied with pre-punched mounting holes.

Category: 2-Piece Non-Metallic Raceway

Tee fitting for use with LDPH5 and LDS5 raceway, White, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

SPILLOVER FITTINGW/4X4EXIT OR EA

Category: Drop-Offs, Spillouts & Outlets