Search results

OFR20 Single Channel, Low Voltage 1-piecOne-piece single channel low voltage raceway with adhesive tape backing for data cable routing along top of modular furniture partitions. Available in 6' lengths.

Category: 1-Piece Non-Metallic Raceway Elbows

T-45 electrical bracket and box for installation of 106 duplex outlet, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Snap-on single gang 106 duplex communication faceplate. Used to cover one NEMA standard 106 duplex communication module frame. Module frame screw mounts directly to underside of snap-on faceplate. No mounting device needed. Supplied with one mounting scre

Category: 1-Gang Raceway Box Covers & Faceplates

Right angle fitting. Used to join sections of TG raceway at 90° flat junctions, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Solid hinged duct, 3 W x 4 H, 6' length, PVC, black, no mounting holes, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Panduct® type G wide slot wiring duct, 2 W x 5 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

T-70 cover coupler fitting: Joins cover sections of T-70, Twin-70, and TG-70. raceway cover together, International Gray.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Deep Strut - No Holes, Height: 1-5/8", Width: 1-5/8", Material: Steel, Finish: -Pre-Galvanized, Gauge: 16, Length: 20 feet. Color: Silver.

Category: Steel Solid Strut

W-mold G20ig306 Gry 3w1ckt Pl ugmold

Category: Single Circuit Steel Plugmold

Channel, Slotted Wall, 2" x 2" (50mm x 50mm), 6', Fiber-Duct, Orange, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Optional split cover for the four way cross fitting FRFWC12X4W6YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90° horizontal turn from a straight horizontal run. Cover included. Black.

Category: Wireway U-Connectors

24 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Yellow.

Category: 1-Piece Non-Metallic Raceway End Fittings

Optional split cover for the outside vertical right angle fitting FROVRA6X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Attaches to 6x4 channel and/or fittings to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FROVRA6X4YL to change level of a straight horizontal run. Includes split cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Type NC halogen-free wiring duct cover, 37mm W x 2M length, halogen-free, light gray.

Category: Wire Duct Covers

Optional split cover for the horizontal right angle fitting FRRA6X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Fire box adapter for use with LD5/LDPH5 profile raceway.NOTE: For low voltage applications only, International Gray, ABS, Length 2.00 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Optional split cover for the horizontal tee fitting FRT4X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Single gang two-piece screw together intermediate outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12in L x 3.38in W x 2.27in H (130.2mm x 86.0mm x 57.7mm). Breako

Category: 1-Gang Raceway Device Boxes

Snap-on single gang rectangular electrical/communication faceplate. Used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame, International Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Attaches to 12x4 channel and/or fittings to create a 90° vertical drop from a horizontal run. Hinged door included. Requires coupler to attach FRIDT6X4BL or FRTR6X4BL to vertical exit. Accepts optional snap-on cover FRHC12BL6 in conjunction with channel.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Communication PCommunication pole. Allows for data cable entry into office furniture raceway from suspended ceiling. 8' pole allows maximum 7' distance from top of furniture partition to ceiling. Must be used with OFR20MPT. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Right angle fitting. Used to join sections of T-70 raceway at right angles, White.

Category: 1-Piece Non-Metallic Raceway Elbows