Conduit, Duct, & Raceway

Steel, Divided Tee, 4000 Series. Size: 12" Length. Ivory.

Category: Large 2-Piece Metallic Raceway Tee Fittings

Type 12 Lay-In Wireway, Hinge Cover, 12 Inch x 6 Inch x 12 Inch, Steel, Gray

Category: Hinged Cover Wireway

Two-compartment pole. Nominal material thickness .050" [1.8mm].Furnished unwired without outlets.Two 8" [203mm] removable covers with KOs for modular jacks and modular furniture communication outlets. Mounting hardware, entrance end plate, and ceiling trim plates furnished. Length: 10'5"

Category: Aluminum Power Poles

Panduct® type G wide slot wiring duct, .5 W x .5 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Slotted Deep Strut, 3-1/4" x 1-5/8" x 20' Long, Steel, Pre-Galvanized, Slots are1-1/8" x 9/16", 2" on Center.

Category: Steel Solid Strut

Entrance End Fitting / 5500 Series Raceway, Ivory, Concentric 3/4", 1", 1-1/2" & 2" Knockouts on End and Back.

Category: 2-Piece Non-Metallic Raceway End Fittings

Add-On Power Cover for Tele-Power Pole, Aluminum

Category: Power Pole Covers

Feed-Through Nipples used between adjacent wireway sections or fittings adjusting wireway length. This Nipple Feed-Through Wireway, F22WN2 item measures 2.50x2.50x2.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Wireway 90 Degree Elbow, Lay-In, Top Opening, 12 x 6 Inch, Mild Steel, Gray

Category: Wireway Elbows

Steel Feed-Through Elbows used for connecting wireway at 45-deg turns in industrial applications. This 45-Degree Elbow Feed-Through, F44WE45 item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

3/4 Inch Type 316 Stainless Steel EMT Conduit, 10 Foot Length

Category: Straight Stainless Steel EMT Conduit

Wiring Trough, NEMA Type 12, Hinged Cover, 6" x 6" x 72", Gray

Category: NEMA 12 Wire Trough

5 Inch PVC 90 Degree Sweep Elbow, 60 Inch Radius, Schedule 40, Gray

Category: 90° PVC Sweeps

Ladder Type Cable Tray, Aluminum, 24 Inch Wide x 6 Inch Deep x 20 Foot Length, 9 Inch Rung Spacing

Category: Straight Cable Ladder Tray

OFR Series Tee/Cross

Category: Metallic Overfloor Raceway Elbows

Steel, Prewired Plugmold, Length: 5 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Dual Circuit, Single Outlets

Category: Dual Circuit Steel Plugmold

Deep Strut - Elongated Holes on Back, Height: 1-5/8", Width: 1-5/8", Material: Steel, Finish: Hot Dipped Galvanized, Gauge: 12, Length: 20 feet. Color: Silver.

Category: Steel Strut with Elongated Holes

Wire Trough, Type 12, Hinged Cover, Straight Section, Size/Dims: 4.00x4.00x36.00, Material/Finish: Steel/Gray.

Category: NEMA 12 Wire Trough

Power Pole, Two Compartment, Aluminum, (2) Duplex Receptacles, 20 Amp, 125 Volt, 2-1/4 In Wide, 2-5/16 In Deep, 15 Ft, 5 In Long, Satin Anodized Finish, Includes Entrance End Plate and Ceiling Trim Plate

Category: Aluminum Power Poles

Steel Box connectors used inside an enclosure when wireway is connected to ensure a tight seal. This Box Connector Feed-Through, F88WB item measures 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway U-Connectors

4 Inch PVC 30 Degree Sweep Elbow, 24 Inch Radius, Gray, Schedule 40

Category: 30° PVC Sweeps

BLN 6A-18-90VO12 VERTICAL OUTSIDE

Category: 90° Vertical Outside Tray Bend

2 Inch PVC 22-1/2 Degree Elbow, Schedule 40, Gray, Bell End

Category: Schedule 40 22-1/2° Elbows

6A-18-30VI12 VRT I/S

Category: 30° Vertical Inside Cable Tray Bend