Connectors, Crimps, & Termination

Mold,cable,horz Thru Parallel On Top

Category: Parallel Horizontal Tees

6-Port Clear Multi-Tap Pre-Insulated Connector, 250MCM – 6 AWG

Category: Dual Sided Entry Wire Connector Blocks

Locking Fork Terminal, Heat-shrinkable Polyoefin, Wire Range: 16 - 14 AWG, 600V, Stud Size: #10, Color: Blue. Package of 100.

Category: Heat Shrink Locking Fork Terminals

PWR DIST BLK-310A 3P 350KCMIL-4AWG LINE 4-14AWG(15X) LOAD

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Mold,cable, Horz Thru Parallel On Top

Category: Parallel Horizontal Tees

Heat-Shrinkable HSC Series End Caps for Cable Range 2/0 - 350 MCM, Expanded Diameter 1.5 inch, Length 3.25 inch, rated for 600 Volt, 90 degrees continuous use, Material: Cross-linked polyolefin with thermoplastic adhesive liner, Black

Category: Heat Shrink End Caps

insulation Piercing Connector 750-250 Main, 500-250 Tap

Category: Splices - Insulation Piercing

Flame Retardant Non-Lined Heat Shrink Tubing, 1/2 IN ID Expanded, 6 IN, Polyolefin

Category: Thin Wall Heat Shrink

CU GRD LUG-6STR-Z&N=.625

Category: 2-Hole Long Barrel Copper Compression Lugs

Ring Terminal, Heavy Duty, 16-12 AWG, #10 Stud Size, Pack of 500

Category: Non-Insulated Ring Tongues

Compression Ground Tap Copper Connector, Tin Hot Dipped, #6 Sol.-#2 Str. (Run), #8 Sol.-#6 Str. (Tap), High Strength Copper Irreversible Compression

Category: Grounding Grid Connectors

Cable to Ground Rod or Other Rounds, GT, Copper-bonded, 0.625" dia, 1/0 Concentric

Category: Cable to Ground Bar - Horizontal Tee

Welding DISK, Steel, Diameter: 1", 50/Pack

Category: Welded Connection Disks

CAD PTC2L2L

Category: Parallel Horizontal Tees

3MÖ Cold Shrink/Armorcast, Armored or Non-Armored Splice Kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. Connectors are not included. Kits include armorcast structural material to reconstitute the cableÆs armor. Meets the requirements of IEEE 404. Each kit makes one 3/C splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

Compression Terminal, 300 kcmil, Copper, One Hole, 1/2 Stud Size, Standard Barrel, Inspection Window Internal Chamfer, Tin Plated

Category: 1-Hole Copper Compression Lugs

Power Distribution Block, 1-Pole, Line: 2 AWG - 600 kcmil Cu/Al; Load: (6) 14-2 Cu, 8-2 Al (3) 14-1/0 Cu, 8-1/0 Al

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Non Insulated Ring Terminal, Bolt Hole #6, 12-10 AWG, .31 IN W x .82 IN L, Copper, Tin Plated

Category: Non-Insulated Ring Tongues

THB RDV727 INS VINYL RING TER

Category: Vinyl Insulated Ring Tongues

Flexible Heat Shrink, Adhesive Lined, 1/2", Black, (4) 6" Pieces

Category: Thin Wall Heat Shrink

Ring Terminal, 0.5 – 1.0mm² wire range, M3 stud size, nylon barrel insulated, funnel entry, bulk package.

Category: Vinyl Insulated Ring Tongues

Compression Lug, Two-Hole, 500 kcmil Cable, 1/2 Stud Hole, 1.75 Hole Spacing

Category: 2-Hole Copper Compression Lugs

Dual Rated Turn Prevent Lug 600 MCM - 2 AWG Dual Rated Turn Prevent Lugs are made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature Rating 90 degrees C.

Category: 1-Conductor Aluminum Mechanical Lugs

Grounding Busbar, Copper, 1/4" x 2" x 12"

Category: Bus Bars