Search results

WMD PN10F86FW NM DROP CEILING

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type FS solid wall wiring duct, 3 W x 2 H, 6' length, PVC, black, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, Off White, PVC, Length 10.00 ft, Width 0.77 in.

Category: 2-Piece Non-Metallic Raceway

Inside corner fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 2.49 in.

Category: 1-Piece Non-Metallic Raceway Elbows

For branching of 2800 Series Raceway running at right angles. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. Ivory

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Optional split hinged cover for the channel FR4X4YL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

Category: 2-Piece Non-Metallic Raceway Covers

Non-Metallic, Internal Elbow, 2800 Series. Size: 1-1/4" Bend Radius, PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Internal Elbow, 2800 Series. Size: 1-1/4" Bend Radius, PVC, White.

Category: 1-Piece Non-Metallic Raceway Elbows

T-45 inside corner fitting, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

For covering joint where two pieces of PN05 Series Raceway come together.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Outside corner fitting. Used to join sections of T-70 raceway at outside corners. White.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Left End Cap, 5000 Series. Size: 5-29/32" Length, 1-3/16" Width, 5/16" Depth. PVC, Black.

Category: 2-Piece Non-Metallic Raceway End Fittings

Fire box adapter for use with LD5/LDPH5 profile raceway.NOTE: For low voltage applications only, White, ABS, Length 2.00 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Surface Raceway, 2-Piece, Latching, 1.52" x .86" x 6', Off-White

Category: 2-Piece Non-Metallic Raceway

Optional split cover for the horizontal tee with 4x4 exit fitting FRT12X4W6BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

W-mold 2811fo-wh Flat Elbw Fo cat5 White

Category: 1-Piece Non-Metallic Raceway Elbows

Inside corner fitting for use with LD10 and LDP10 raceway, Electric Ivory, ABS, Length 2.49 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, Electric Ivory, Length 10.00 ft.

Category: 2-Piece Non-Metallic Raceway

One-piece latching surface raceway with pre-applied adhesive backed tape, 8 foot length, International Gray, PVC, Length 8.00 ft.

Category: 1-Piece Non-Metallic Raceway

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 8.00 ft, Width 1.52 in.

Category: 2-Piece Non-Metallic Raceway

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, Off White, Length 6.00 ft.

Category: 1-Piece Non-Metallic Raceway

Drop ceiling/entrance end fitting for use with LD5 raceway, International Gray, ABS, Length 3.42 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

50' Nonmetallic Pancake Overfloor Raceway. Accepts up to 5/16" cable diameter. Yellow

Category: Non-Metallic Overfloor Raceway

T-45 tee fitting, White.

Category: 2-Piece Non-Metallic Raceway Tee Fittings