Search results

End cap fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 1.25 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Used to seal off 1" x 5" cabinet top openings when cables are routed through the top of a cabinet. Airtight fabric and Ultra-Cinch™ Tie close top of fabric, minimizing hot air bypass around cables to improve cooling of network equipment and reduce energy

Category: Indoor Free Standing Data, Audio, & Video Enclosures

Fiber Outside Plant Stranded Tube Cable, 50um Multimode OM4 24 Fibers

Category: Multimode Fiber Optic Cable

Used to support the 12x4 system from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 5/8" Threaded Rod.

Category: Mounting Hardware & Brackets

Fiber Indoor-Outdoor Central Tube Cable, Plenum (OFNP), 9um Singlemode OS2 6 Fibers

Category: Single Mode Fiber Optic Cable

2 fiber OM4 patch cord, riser (OFNR) rated, LC duplex to LC duplex, 16mm jacket, Std IL 11 meters

Category: Fiber Optic Patch Cords

2 fiber OM4 patch cord, LC push pull to LC push pull, 16mm jacket, riser (OFNR) rated, Standard IL 9 meters

Category: Fiber Optic Patch Cords

2 fiber OM4 patch cord, LC push pull to LC push pull, 16mm jacket, low smoke zero halogen (LSZH) rated, Standard IL, 10m

Category: Fiber Optic Patch Cords

Adhesive backed latching wire clip, .75" (19.1mm) bundle, black.

Category: Cable Clamps & Clips

Lockout Tagout, 6, Padlock Aluminum Board Kit, 14" x 14".

Category: Lockout / Tagout Kits

Ring Terminal, Vinyl Insulated, 22 - 18 AWG, Funnel Entry, Plastic Insulation Crimp, 5/16" Stud Size

Category: Vinyl Insulated Ring Tongues

Fork Terminal, vinyl insulated, funnel entry, plastic insulation crimp, 22 - 18 AWG wire range, #10 stud size.

Category: Vinyl Insulated Standard Fork Terminals

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

2 fiber OM4 patch cord, riser (OFNR) rated, LC duplex to LC duplex, 16mm jacket, Std IL 8 meters

Category: Fiber Optic Patch Cords

2 fiber OM4 patch cord, riser (OFNR) rated, LC duplex to LC duplex, 16mm jacket, Std IL 21 meters

Category: Fiber Optic Patch Cords

Raceway, Non-Metallic, Low Voltage, One-Piece, Hinged, 6 Foot, Gray

Category: 1-Piece Metallic Raceway

Fork Terminal, vinyl insulated, narrow tongue, funnel entry, plastic insulation crimp, 16- 14 AWG wire range, #6 stud size.

Category: Vinyl Insulated Standard Fork Terminals

Compression Lug, Copper, 2-Hole, Flex, #6 AWG Wire, 1/4 Stud Hole, .75 Hole Spacing, 90° Angle Tongue

Category: 2-Hole Copper Compression Lugs

Female Disconnect, Right Angle, Nylon Insulated, Funnel Entry, Wire Range: 16 - 14 AWG, Color: Blue, Package of 50 Each.

Category: Female Nylon Insulated Wire Disconnects

Panduct® flush cover type D round hole wiring duct, 1 W x 3 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Harness elastic retainer, 1.25" (31.8mm) bundle, #4 screw.

Category: Cable Tie Bases

2 fiber OS2, SC duplex to SC duplex patch cord, 3mm jacket, riser (OFNR) rated, Std IL 10 meters

Category: Fiber Optic Patch Cords

Fiber Outside Plant Stranded Tube, Single Armor/Single Jacket (Corrugated Steel Tape) Cable, 9um Singlemode OS2 6 Fibers

Category: Single Mode Fiber Optic Cable

Panduct® type FS solid wall wiring duct, 2 W x 3 H, 6' length, PVC, white, no mounting holes.

Category: 2-Piece Non-Metallic Raceway