Search results

HOF PDST98PC SOLID DOOR FITS

Category: Rack Doors

Locking Utility Cabinets with Shelf Type 1, 36.00x30.00x12.00, Gray, Steel

Category: NEMA 1 Spare Fuse Cabinets

Zonex ATEX- and IECEx-Certified, Type 4X, Hinged Cover, Material: Stainless Steel, Dimensions: 16" x 12" x 8"

Category: Stainless Steel Wall Mount Enclosures

Two-Door FS Enclosure Type 12, Bulletin A30 (Free-Standing Type 12 Enclosures), Size/Dims: 72.06" x 60.06" x 36.06", Material/Finish: Steel/Paint

Category: NEMA 12 Floor Mount Enclosures

AccessPlus Double-Hinged, NEMA Type 1, Load Rating: 250 lbs, Material: Steel, Dimensions: 23.6" x 24.41" x 30"

Category: Media Center Enclosures with Covers

Wireway Reducer, 4" to 2" Reduction, Material: Stainless Steel

Category: Wireway Reducers

Bonding Cable Clamps, Size: 1/2 Inch, Material: Steel, These Clamps Provide Conductivity Required to Ground the Shielding on EMC-Shielded Cable.

Category: Steel 1-Hole Armored Cable Straps

HOF ATPTW TOUCH UP PAINT TRAF

Category: Touch Up Paint

Padlock Latch Kit, 3-Point, Clockwise/Counterclockwise, For Use With One Door Type 12 Enclosures, Stainless Steel

Category: Latch Kits For Single Door NEMA 12 Enclosures

With pre-installed terminal blocks for three- and four-wire power distribution systems, this trough splits feeder circuit conductors into multiple branch circuit conductors.

Category: NEMA 1 Wire Trough

ProLine Disconnect Packages are ready-to-use enclosures offering flange-mount disconnect solutions. This ProLine-DD Disconnect Enclosure Type 12, PTDDC20186 item measures 2000x1800x600mm with material of Steel colored Lt Gray.

Category: NEMA 12 Floor Mount Disconnect Enclosures

CleanTray Cross allows wireway cables to route in four directions in frequent washdown areas. This Cross CleanTray, CT66CSS item measures 6.00x6.00in with a material of SS304 finish Brushed.

Category: Wireway Elbow-Tee-Cross Fittings

FLUSH MOUNT SCREW COVER

Category: Stainless Steel Wall Mount Enclosures

Heavy duty multi-bay enclosure with a lower profile to maintain line of sight in factory. This Low-Profile 4-Door Disconnect Type 12, A60X4E15718 item measures 60.00x156.50x18.00 inches with material of Steel colored Gray.

Category: NEMA 12 Floor Mount Disconnect Enclosures

86X149X14 4 DOOR

Category: NEMA 12 Floor Mount Enclosures

Divider used to divide CleanTray 90-degree Tee into two sections in frequent washdown areas. This Divider CleanTray 90-Degree Tee Outside Cover, CT44DTOCSS item measures 4.00x4.00in with a material of SS304 finish Brushed.

Category: Wire Duct Clips / Retainers

Louver Plate Kits, 5.62x7.50, SS Type 316

Category: Cooling Fan Exhaust Grills

Free-Stand Single and Dual Access with 3-Point Latches, Type 4X, 72.06x24.06x30.06, SS Type 304

Category: NEMA 4 Floor Mount Enclosures

Soho Networking Cabinet, 19", Bulletin Dncs (network Cabinet Specialty Package),size/dims: 700x600x900mm, Material/finish: Steel/black

Category: Indoor Free Standing Data, Audio, & Video Enclosures

CONCEPT DISCON

Category: NEMA 12 Wall Mount Disconnect Enclosures

CleanTray Straight section splices for connecting two fittings with tabs in frequent washdown areas. This Straight Section Splice CleanTray, CT33SPSS item measures 3.00x3.00 inches with a material of SS304 finish Brushed.

Category: Straight Wire Basket

Syspend Sanitary HMI L-Shaped Tubing, Material: Stainless Steel, Dimensions: 9.84" x 9.84", Outer Diameter of 64 mm (2.50 in.), Inner diameter of 60 mm (2.37 in.)

Category: Polycarbonate Hinge Cover Enclosures

AccessPlus Cabinets provide security, equipment access, cooling and 19in rack-mnt equipment support. This AccessPlus Double-Hinge Type 1 Window, EWMW482436 item measures 48.00x24.41x37.50 inch with a material of Steel colored Black.

Category: Wall Mount Racks

Concept EMC, Type 4, 30.00x24.00x8.00, Lt Gray, Steel

Category: NEMA 4 Wall Mount Enclosures