"AT-G18-1R8L"

AB 20AD027F3AYNANG0 POWERFLEX 70 AC DRIVE 27 A AT 20 HP 20A

Abb; Circuit Breaker; Voltage Rating: 600 Vac/vdc; Amperage Rating: 150 Amp; Trip Range: 750 - 1500 Amp; Frequency Rating: 50 - 60 Hz; Frame: 20 - 250 Amp; Triptype: Thermal-magnetic; Interrupt Rating: 65 Kamp At 480 Vac; Number Of Poles: 3; Length: 4.130 In; Width: 470 In; Height: 870 In; Interrupting Rating Class/breaking Capacity: High; Mechanical Life: 20000 Operations; Weight: 6.180 Lb; T4h150tw: Bkr T4h 150a 3p T/m Ul Lvp

Variable Frequency Drive,DeviceNet,IP67/NEMA 4 Watertight Enclosu,24V DC,25 A Rated Device,6 A at 2.2 kW or 3 Hp,Cndt Entrance with Motor Cable,V/Hz (Sensorless Vector Perf),No Selection for Option 1,No Selection for Option 2,No Selection for Option 3

Abb; Circuit Breaker; Amperage Rating: 250 Amp; Voltage Rating: 600 Vac; Frequency Rating: 50 - 60 Hz; Frame: 250 Amp; Trip Type: Ls/i (ac Only), Pr221; Interrupt Rating: 35 Kamp At 480 Vac; Number Of Poles: 3; Length: 4.130 In; Width: 470in; Height: 870 In; Interrupting Rating Class/breaking Capacity: Standard; Mechanical Life: 20000 Operations; Weight: 6.180 Lb; T4s250bw: Bkr T4s 250a 3p Ls/i Ul Lvp

Power Source:120VAC (80mA Max), Sensor:Ionization, Audio Alarm:85dB at 10ft, Temperature Range:40F (4.4C) to 100F (37.8C), Humidity Range:Up to 85 PCT relative humidity (RH), Size:5.6IN diameter x 1.8INdepth, Weight:.5lbs, Interconnects:Up to 24 Kidde dev

Two Position Maintained Non-Illuminated Selector Switch, 1 NO and 1 NC, Black Plastic Bezel, Color Red, Actuator Position is Maintained at A and C

Abb; Miniature Circuit Breaker; System Pro M Compact; S200p; Voltage Rating: 400, 480y/277 Vac; Amperage Rating: 2 Amp; Frequency Rating: 50/60 Hz; Trip Type: Thermal Magnetic; Trip Range: Magnetic: 16 - 24 Amp, Thermal: 2.1 Amp; Interruptrating: 25 Kamp; Number Of Poles: 2; Enclosure: Ip20, Ip40 With Cover; Actuator:insulation Group Ii, Black, Sealable, I/o Marking; Material: Insulation Group I,ral 7035; Length: 69 Mm; Width: 35 Mm; Height: 88 Mm; Operating Temperature: -25to +55 Deg C; Environmental Conditions: Storage Temperature: -40 To 70 Deg C; Endurance: Electrical And Mechanical: 20000 Cycles; Tightening Torque: 25 In-lb; Mounting: Din Rail: Th35-15 (35 Mm Length X 15 Mm Width), Th35-7.5 (35 Mm Lengthx 7.5 Mm Width); Recommended Screw Driver: Pozidriv 2; Connecting Capacity: Conductor: 18 - 4 Awg, Busbar: 18 - 8 Awg; Energy Limiting Class: 3; Insulation Voltage: Phase To Ground: 250 Vac, Phase To Phase: 500 Vac; Tripping Characteristic:k; Impulse Withstand Voltage: 4 Kv; Dielectric Test Voltage: 2 Kv At 50/60 Hz For 1 Mint; Pollution Degree: 2; Contact Position Indication: On/off; Overvoltagecategory: Iii

Eaton UL 489 WMZD DIN Rail Miniature Circuit Breaker,DIN Rail miniature circuit breaker,25 A,10 kAIC/DC at 125 Vdc,Two-pole,250 Vdc,50-60 Hz,Standard box terminals,C curve

Appleton Code Master 2 Factory Sealed HID Luminaire With Guard, Fixture Type: Ceiling Mount, Lamp Type: 400 WTT M155 34000 LM Mogul Pulse Start Metal Halide, Lamp Wattage: 400 WTT, Voltage Rating: 120/208/240/277 V, Number Of Lamps: 1, Material: Copperfree (4/10 Of 1 PCT Maximum) Aluminum Body And Guard, Sand-Cast Copperfree (4/10 Of 1 PCT Maximum) Aluminum Ceiling Mounting Hood, Fixture Wattage: 400 WTT, Amperage Rating: 1.5 AMP Starting, 1.75 AMP Operating At 277 V, Length: 12 IN, Width: 12 IN, Height: 24.36 IN, Housing Finish: Epoxy Powder Coat, Housing Material: Copperfree (4/10 Of 1 PCT Maximum) Aluminum, Ambient Temperature Range: 40 DEG C, Temperature Range: 75 DEG C Supply Wire, Lens Material: Heat And Impact Resistant Glass Globe, Ballast Type: Super Constant Wattage Autotransformer (S. C.W.A.), Ballast Quantity: 1, Number Of Hubs: 4, Hub Size: 1 IN, Standard: NEC: Class I, Division 1 And 2, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, CSA: Class I, Division 1 And 2, Groups B, C, D, Class I, Zone 1 And 2, IIB, IIA, Class II, Division 1, Groups E, F, G, Class II, Division 2, Groups F, G, Class II, Type 4X, Exd IIB, Zone 1, UL 1598, 844, E1044, CSA C22.2 No.250, C22.2 No.137, 025428, For Use In Chemical And Petrochemical Plants, Such As Manufacturers Of Plastics, Paints And Thinners, In Refineries, And In Other Process Areas Where Ignitable Vapors, Dust, Moisture, Marine And Corrosive Elements May Be Present, Wet Locations

Appleton Mercmaster III 400 KP Series HID Luminaire Without Guard, Fixture Type: Pendant Cone Hood (Rigid Mounting), Lamp Type: 250 WTT Mogul Pulse Start Metal Halide, Lamp Wattage: 250 WTT, Voltage Rating: 120/208/240/277 V, Number Of Lamps: 1, Material: Cast Copperfree (Less Than 4/10 Of 1 PCT Copper) Aluminum Mounting Hoods, Ballast Bodies, Stainless Steel Hardware And Latch Assemblies, Fixture Wattage: 291 WTT, Amperage Rating: 0.85 AMP Starting, 1.1 AMP Operating At 277 V, Length: 13.44 IN, Width: 13.44 IN, Housing Finish: Epoxy Powder Coat, Housing Material: Cast Copperfree (Less Than 4/10 Of 1 PCT Copper) Aluminum, Ambient Temperature Range: 65 DEG C, Temperature Range: 90 DEG C Supply Wire, Lens Material: Tempered Heat And Impact-Resistant Lens, Ballast Type: Constant Wattage Autotransformer (C.W.A), Ballast Quantity: 1, Number Of Hubs: 1, Hub Size: 3/4 IN NPT, Reflector/Refractor: Etched Alzak Aluminum Enclosed Refractor, Frequency Rating: 60 HZ, Enclosure: NEMA 4X, IP66, Standard: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, AEx nA nR IIC (Z2), Class I, Zone 2, Ex nR IIC (Z) - CSA Certified, Class I, Zone 2, AEx nR IIC (ZB), Class II, Division 1 And 2, Groups E, F, G, Class III, Simultaneous Exposure (Class I, Division 2/Class II, Division 1), UL Listed: E10444, 1598, 1598A, 844, 60079-0, 60079-15, For Use In Marine And Wet Locations, Areas Where Flammable Gases And Vapors Or Combustible Dusts Are Present Under Conditions Defined By The National Electrical Code , Non-Hazardous Locations Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust Or Corrosive Atmospheres Are Encountered, Pulp And Paper Mills, Processing Plants, Chemical Plants, Oil Refineries, Foundries, Manufacturing Plants, Storage Areas, Waste And Sewage Treatment

Appleton Mercmaster III 400 KP Series HID Luminaire Without Guard, Fixture Type: Wall, Lamp Type: 400 WTT 44000 LM Mogul Pulse Start Metal Halide, Lamp Wattage: 400 WTT, Voltage Rating: 120/208/240/277 V, Number Of Lamps: 1, Material: Cast Copperfree (Less Than 4/10 Of 1 PCT Copper) Aluminum Mounting Hoods, Ballast Bodies, Stainless Steel Hardware And Latch Assemblies, Fixture Wattage: 454 WTT, Amperage Rating: 1.5 AMP Starting, 1.25 AMP Operating At 277 V, Width: 17 IN, Housing Finish: Epoxy Powder Coat, Housing Material: Cast Copperfree (Less Than 4/10 Of 1 PCT Copper) Aluminum, Ambient Temperature Range: 40 DEG C, Temperature Range: 90 DEG C Supply Wire, Lens Material: Tempered Heat And Impact-Resistant Lens, Ballast Type: Super Constant Wattage Autotransformer (S. C.W.A.), Ballast Quantity: 1, Number Of Hubs: 5, Hub Size: 3/4 IN NPT, Reflector/Refractor: Etched Alzak Aluminum Enclosed Refractor, Frequency Rating: 60 HZ, Enclosure: NEMA 4X, IP66, Standard: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, AEx nA nR IIC (Z2), Class I, Zone 2, Ex nR IIC (Z) - CSA Certified, Class I, Zone 2, AEx nR IIC (ZB), Class II, Division 1 And 2, Groups E, F, G, Class III, Simultaneous Exposure (Class I, Division 2/Class II, Division 1), UL Listed: E10444, 1598, 1598A, 844, 60079-0, 60079-15, For Use In Marine And Wet Locations, Areas Where Flammable Gases And Vapors Or Combustible Dusts Are Present Under Conditions Defined By The National Electrical Code , Non-Hazardous Locations Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust Or Corrosive Atmospheres Are Encountered, Pulp And Paper Mills, Processing Plants, Chemical Plants, Oil Refineries, Foundries, Manufacturing Plants, Storage Areas, Waste And Sewage Treatment

Appleton Mercmaster Enclosed And Gasketed Luminaire, Fixture Type: Wall Mount, Lamp Type: 35 WTT 2300 LM 70 CRI 60000 HR 5650 DEG K LED, Lamp Wattage: 35 WTT, Voltage Rating: 120 - 277 VAC, Material: Cast Copperfree (4/10 Of 1 PCT Maximum) Aluminum Mounting Hood And Ballast Body, Stainless Steel Hardware And Latch Assemblies, Amperage Rating: 0.31 AMP At 120 V, Width: 18.63 IN, Height: 8.54 IN, Housing Finish: Baked Gray Epoxy-Clad, Housing Material: Cast Copperfree (4/10 Of 1 PCT Maximum) Aluminum, Ambient Temperature Range: 65 DEG C, Temperature Range: 90 DEG C Supply Wire, Lens Material: Polycarbonate Globe, Number Of Hubs: 5, Hub Size: 3/4 IN NPT, Frequency Rating: 50/60 HZ, Lamp Wattage Equivalent: 70 WTT HPS/PSMH, Enclosure: NEMA 3R, 4X, IP66/67, Standard: NEC/CEC: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, Group IIC, Class II, Division 1, Group E, F, G, Class II, Division 2, Group F, G, Class III, UL 1598, 1598A, 8750, 844, CSA C22.2 No.250, C22.2 No.137, 065182, For Marine And Wet Locations, Wide Range Of Industrial, Chemical Processing And Other Areas Where Flammable Gases And Vapors Are Present, Areas Of Low Clearance, Low Ceiling Heights Or Where Fixture Weights Must Be Minimized, Non-Hazardous Locations Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust, Corrosive Atmosphere Or High Ambient Temperatures Are Encountered, Pulp And Paper Mills, Processing Plants, Chemical Plants, Oil Refineries, Foundries, Manufacturing Plants, Storage Areas, Waste And Sewage Treatment, Parking Garages, Other Areas Where Dust, Water, Dirt And Rough Usage Are A Problem

Telemecanique,INTERFACE RELAY - ELECTROMECHANICAL,-5...40 °C unrestricted operation/-20...60 °C at Un,125 V DC252 V AC,17.5mm,17V,2 A conforming to IEC 60947-1,2 NO,50/60Hz,<=16V,>= 20000000 cycles,Schneider Electric,Screw clamp terminal,UL, IEC,asymmetrical DIN railcombination railsymmetrical DIN rail,electromechanical input interface module electromechanical input interface module,interface for discrete signals

SIEMENS LOW VOLTAGE MOLDED CASE CIRCUIT BREAKER WITH TRIP FREE MECHANISM. QJ FRAME STANDARD 40C BREAKER. 175A 2-POLE (10KA AT 240V). SPECIAL FEATURES NO LUGS INSTALLED.

SIEMENS LOW VOLTAGE MOLDED CASE CIRCUIT BREAKER WITH TRIP FREE MECHANISM. QJ FRAME STANDARD 40C BREAKER. 225A 3-POLE (22KA AT 240V). SPECIAL FEATURES NO LUGS INSTALLED. ACCESSORIES INCLUDED 120VAC SHUNT TRIP.

Abb; Circuit Breaker; Voltage Rating: 480/500 Vac/vdc; Amperage Rating: 175 Amp;trip Range: 1750 Amp; Frequency Rating: 50 - 60 Hz; Frame: 225 Amp; Trip Type: Thermal-magnetic; Interrupt Rating: 35 Kamp At 480 Vac; Number Of Poles: 3; Length: 4.130 In; Width: 2.760 In; Height: 5.900 In; Interrupting Rating Class/breaking Capacity: Standard; Mechanical Life: 25000 Operations; Weight: 5.450 Lb; T3s175tw: Bkr T3s 175a 3p T/m Ul Lvp

20D,34 A at 25 Hp,480V AC Three Phase,IP20/NEMA/UL 1,Ph II Ctrl W/ Logix Exp Board,Future Use,No HIM Blank Plate,No Communication Module,W/ EMC Filt & ComModeChoke,Brake IGBT Installed,No Internal Brake Resistor,Size 2 Frame,Ph II Ctl, 5730 DrvLogix,English Documentation

20D,_125 A at 100 Hp,650V DC No Precharge,IP20/NEMA/UL 1,Ph II Ctrl - Expanded Cassette,Safe Off with Second Encoder,Numeric Keypad - LCD Display,ControlNet Coaxial,W/ EMC Filt & ComModeChoke,Without Brake IGBT,No Internal Brake Resistor,Size 5 Frame,Ph II Ctl, No DriveLogix,English Documentation

Abb; Circuit Breaker; Amperage Rating: 150 Amp; Voltage Rating: 600 Vac/vdc; Trip Range: 750-1500 Amp; Frequency Rating: 50 - 60 Hz; Frame: 20 - 250 Amp; Trip Type: Thermal-magnetic; Interrupt Rating: 25 Kamp At 480 Vac; Number Of Poles: 3;length: 4.130 In; Width: 470 In; Height: 870 In; Interrupting Rating Class/breaking Capacity: Normal; Mechanical Life: 20000 Operations; Weight: 6.180 Lb; T4n150tw: Bkr T4n 150a 3p T/m Ul Lvp

Abb; Circuit Breaker; Proline; Voltage Rating: 120/208/240 Vac, 12 V (minimum Operating); Amperage Rating: 30 Amp; Frequency Rating: 50/60 Hz; Trip Type: Thermal Magnetic; Interrupt Rating: 35 Kamp With Main Breaker, 10 Kamp At 120/240 Vac;number Of Poles: 1; Enclosure: Ip20; Length: 401 In; Height: 4.708 In; Width: 0.685 In; Operating Temperature: -25 To +55 Deg C; Environmental Conditions: Storage Temperature: -40 To 70 Deg C; Tightening Torque: 2.8 N-m; Wire Size: 18 - 4 Awg; Service Life: 20000 Operations (below 32 Amp), 10000 Operations (32 Amp Andhigher)

MILW 6180-20 14IN CUT-OFF SAWMilwaukee; Chop Saw; Abrasive; Voltage Rating: 120 Vac/vdc; Amperage Rating: 15amp; Horse Power: 5.4 Hp; Speed: 3900 Rpm At No Load; Cutting Capacity: 5 In Insquare Stock, 5-3/8 In In Round Pipe, 5-3/8 In In O.d. Pipe; Cut Type: Abrasive;tool Weight: 49.500 Lb; Tool Length: 19-1/4 In; Spindle Lock: Yes; Maximum Opening: 8 In; Spindle: 1 In; Maximum Bevel Capacity: 45 Deg

20B,_156 A at 125 Hp,480V AC Three Phase,IP20/NEMA/UL 1,Vector Ctrl W/ 120V I/O,Standard Encoder,EtherNet/IP,Numeric Keypad LCD Display,W/ EMC Filt & ComModeChoke,Without Brake IGBT,No Internal Brake Resistor,Size 6 Frame,No Custom Firmware,Documentation

AB 20AD034A3AYYAEG1 POWERFLEX 70 AC DRIVE 34 A AT 25 HP 20A

Appleton Mercmaster Enclosed And Gasketed Luminaire, Fixture Type: 25 DEG Stanchion, Lamp Type: 46 WTT 3450 LM 70 CRI 60000 HR 5650 DEG K LED, Lamp Wattage: 46 WTT, Voltage Rating: 347 - 480 VAC, Material: Cast Copperfree (4/10 Of 1 PCT Maximum) Aluminum Mounting Hood And Ballast Body, Stainless Steel Hardware And Latch Assemblies, Amperage Rating: 0.2 AMP At 277 V, Width: 16.93 IN, Housing Finish: Baked Gray Epoxy-Clad, Housing Material: Cast Copperfree (4/10 Of 1 PCT Maximum) Aluminum, Ambient Temperature Range: 65 DEG C, Temperature Range: 90 DEG C Supply Wire, Lens Material: Polycarbonate Globe, Number Of Hubs: 1, Hub Size: 1-1/4 IN NPT, Frequency Rating: 50/60 HZ, Lamp Wattage Equivalent: 100 WTT HPS/PSMH, Enclosure: NEMA 3R, 4X, IP66/67, Standard: NEC/CEC: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, Group IIC, Class II, Division 1, Group E, F, G, Class II, Division 2, Group F, G, Class III, UL 1598, 1598A, 8750, 844, CSA C22.2 No.250, C22.2 No.137, 065182, For Marine And Wet Locations, Wide Range Of Industrial, Chemical Processing And Other Areas Where Flammable Gases And Vapors Are Present, Areas Of Low Clearance, Low Ceiling Heights Or Where Fixture Weights Must Be Minimized, Non-Hazardous Locations Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust, Corrosive Atmosphere Or High Ambient Temperatures Are Encountered, Pulp And Paper Mills, Processing Plants, Chemical Plants, Oil Refineries, Foundries, Manufacturing Plants, Storage Areas, Waste And Sewage Treatment, Parking Garages, Other Areas Where Dust, Water, Dirt And Rough Usage Are A Problem