Search results

The black powder coated wall bracket is 2.44" (61.98 mm) high, 6.05" (153.67 mm), long, 3.12" (79.25 mm) wide, and 6.05" (153.67 mm) deep. It is used to support the end of the 18" (457.2 mm), 24" (609.6 mm), or 30" (762 mm) Wyr-Grid® Pathway against a wa

Category: Wire Duct Clips / Retainers

Wiring Duct Cover, PANDUCT, 50mm W x 2m Long, PVC, White, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

CHANNEL SOLID WALL MTG. HOLES 4 X 4

Category: Standard Density Wire Duct

Panduct® type MC metric narrow slot wiring duct, 37mm W x 62mm H x 2M length, PVC, white.

Category: Standard Density Wire Duct

2 x 2 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Light Gray.

Category: Wireway Closure Plates

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4OR, S4X4OR6 or E4X4OR6 directly.

Category: Wireway Elbow-Tee-Cross Fittings

Panduct® type G wide slot wiring duct, 1 W x 1.5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 24" (609.6 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 26.7" (678.2 mm) long, 2.2" (56.4 mm) wide, and 26.7" (678.2 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

OVERHEAD SPLCONNECTOR 12IN -18IN EZ EA

Category: Wire Duct Clips / Retainers

Duct cover, 100mm W x 2M length, PVC, RAL 7030 grey.

Category: Wire Duct Covers

Duct cover, 62mm W x 2M length, PVC, RAL 7030 grey.

Category: Wire Duct Covers

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Yellow.

Category: Wireway Elbows

Panduct® flush cover type D round hole wiring duct, 2 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

4in x 4in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Yellow.

Category: Wireway U-Connectors

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Orange.

Category: Wireway Elbows

OVERHEAD BRACKET CANTILEVER 18IN EZ EA

Category: Wire Duct Clips / Retainers

OVERHEAD INTERSECTION SPLICE EZ EA

Category: Wire Duct Clips / Retainers

Solid Wall Raceway used in non-plenum applications. Base and covers sold separately, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

The flat, pre-galvanized metal liner in gray is 12" (304.8 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

Wiring Duct Cover, PANDUCT, 25mm W x 2m Long, PVC, White

Category: Wire Duct Covers

Panduct® flush cover type D round hole wiring duct, 1.5 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2OR or FIVRA4X4OR to change level of straight horizontal runs. Cover included.

Category: Wireway Elbows

2in x 2in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Orange

Category: Wireway U-Connectors

FIBERDUCT FITTINGENDCAP 2INX2IN OR EA

Category: Wireway Closure Plates