Search results

The pan-post standoff is natural color and requires a #12 (M5.5) screw. It measures 1.06"L x .72"W x 1.97"H (26.9 x 18.3 x 50.0 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 10.

Category: Cable Tie Bases

Snap-In Cable Tie Mount, Uses #6 (M3) Screws, ABS Material, White, Package of 500

Category: Cable Tie Bases

Heavy Duty Cable Tie Mount, Applied with #8 (M4) Screws, 0.72" (18.29mm) Wide, Weather-Resistant Nylon 6.6, Black, Package of 100

Category: Cable Tie Bases

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 2.19" (55.6 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases

Cable Tie Mount, Applied with #4 (M2.5) Screws, 0.32" Wide, Heat-Resistant Nylon 6.6, Natural, Package of 1000

Category: Cable Tie Bases

Cable Tie Mount, Applied with #6 (M3) Screws, 0.32" Wide, Heat-Resistant Nylon 6.6, Ivory, Package of 1000

Category: Cable Tie Bases

Cable Tie Mount, Applied with #1/4 (M6) Screws, 0.62" (16mm) Wide, Heat-Resistant Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

THB TC5141-NDT SADDLE SPRT BA

Category: Cable Tie Bases

CAT MPNY-750S-9-C CABLE TIE 3

Category: Cable Tie Bases

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 1.44" (35.6 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases

THB TC342 2WAY MTG BASE 1.1X1

Category: Cable Tie Bases

The cable tie mount in black is applied with a #6 (M3) screw and is 0.32" (8.1 mm) wide. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages

Category: Cable Tie Bases

The push rivet applied low profile cable tie mount in red with 0.144" (3.7 mm) hole keeps bundle close to mounting surface and installs with an integral rivet for a strong, secure installation. It is for indoor use only made of Nylon 6.6 and comes in pack

Category: Cable Tie Bases

Multiple Tie Plate, Requires #10 (M5) Screws, Nylon 6.6, Indoor Use, 1.75" x 0.5" x 1.25", Natural, Package of 100

Category: Cable Tie Bases

The cable tie mount in white uses #6 (M3) screws or user supplied adhesive. It measures 1.12" long x 1.12" wide (28.5 x 28.5 mm). It is used with miniature, intermediate, and standard cable ties. It is made of nylon 6.6, which increases mechanical strengt

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in white is mounted with rubber adhesive tape. It is 0.75" long x 0.75" wide (19.1 x 19.1 mm) and made of ABS plastic. It is used with miniature and intermediate cable ties. It is designed for indoor environments

Category: Cable Tie Bases

THB MCNY-1250-9-D MTG CRADLE

Category: Cable Tie Bases

Cable Tie Mounting Cradle, Natural Nylon 6.6 for Temperatures up to 49 Degrees Celsius (120 F), Width of 25.4mm (1.0 Inches), Length of 31.75mm (1.25 Inches), Height of 7.23mm (0.285 Inches), Clearance Hole Diameter of 3.96mm (0.156 Inches), Rubber Based Adhesive Mounting (Can Also Use #6 Self-Tapping Screw for Added Strength), Accepts Cable Ties to 220 Newtons (50 Pounds), 50 Pack

Category: Cable Tie Bases

The locking cable tie is white and has a 1.0 x 0.9" (25 x 23mm) adhesive mounting base. It is 7.3" (185.4 mm) long and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 25.

Category: Cable Tie Bases

THB TC824-TB MNTG PLATE1.4X.4

Category: Cable Tie Bases

The cable tie mount in black is installed onto a 0.63" (16.0mm) stud. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of

Category: Cable Tie Bases

THB SMNY-000-9-D CABLE TIE .3

Category: Cable Tie Bases

The multiple bridge adhesive backed cable tie mount in black with 4-way cable tie entry makes part orientation fast and easy. It is mounted with rubber adhesive tape and has a hole spacing of 2.5" (63.5 mm). It is 5.13" long x 0.75" wide (130.3 x 19.0 mm)

Category: Cable Tie Bases

The winged push barb cable tie mount requires a 0.250" (6.5 mm) hole and is black. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases