Search results

Device mounting bracket, PVC, Gray, Used to mount NEMA standard single gang electrical outlets and communication devices with either screw-on or snap-on single gang faceplates. Can be used with T-70, Twin-70, and TG-70 raceway.

Category: 1-Gang Raceway Device Brackets & Plates

Used to support 2x2 and 4x4 Fiber-Duct™ Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket.

Category: Wireway Support Hangers

Panduct® type MC metric narrow slot wiring duct, 50mm W x 75mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

Slotted Divider Wall, 4 Inch Nominal Duct Height, Length: 6 Feet, Material: PVC, Color: White.

Category: Wall Duct Dividers

Used to support the 12x4 system attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod require

Category: Mounting Hardware & Brackets

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, Off White, Length 6.00 ft.

Category: 1-Piece Non-Metallic Raceway

T-45 inside corner fitting, White.

Category: 2-Piece Non-Metallic Raceway Elbows

T-45 end cap fitting, White.

Category: 2-Piece Non-Metallic Raceway End Fittings

Panduct® type MC metric narrow slot wiring duct, 25mm W x 62mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

Bracket for vertical PDU mounting to the side of the4 postsracks (set of 2 brackets).

Category: Special Purpose Wire Duct

Panduct® type MC metric narrow slot wiring duct, 37mm W x 62mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

Panduct® Solid Divider Wall, 2.00" Nominal Duct Height, 6' Length, PVC, Light Gray

Category: Wall Duct Dividers

Panduct Wide Slot Wiring Duct, Type G, 1.75" W x 3.12" H x 6' L, Lead Free PVC, Black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® duct corner strip with 1" bend radius control, 6' lenght for use with all types of PVC wiring duct, cut-to-size 6', light gray.

Category: Wireway Elbows

Panduct® solid divider wall, 4.00" nominal duct height, 6' length, PVC, white.

Category: Wall Duct Dividers

Hinged duct cover, 1.5 W x 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

T-45 raceway hinged cover in 8 foot lengths.

Category: 2-Piece Non-Metallic Raceway

Panduct® type G wide slot wiring duct, 1.5 W x 3 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type FS solid wall wiring duct, 1.5 W x 1.5 H, 6' length, PVC, light gray, no mounting holes

Category: 2-Piece Non-Metallic Raceway

Panduct® type G wide slot wiring duct, 2 W x 1.5 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Raceway Outlet Box, 1-Gang, Non-Metallic, Adhesive Backing, For use withT-70 and Twin-70 raceway only.y, 1.49" Height, 4.09" Length, 2.34" Width.. Color: Gray

Category: 1-Gang Raceway Device Boxes

Single gang one-piece outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.09"L x 3.34"W x 1.75"H (129.4mm x 85.0mm x 44.4mm). Breakouts for 1/2"

Category: 1-Gang Raceway Device Boxes

Halogen-Free Wiring Duct, .97" W x 1.88" H x 10' L, Light Gray

Category: Special Purpose Wire Duct

Single gang two-piece screw together intermediate outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12"L x 3.38"W x 2.27"H (130.2mm x 86.0mm x 57.7mm). Breakouts fo

Category: 1-Gang Raceway Device Boxes