Search results

The Wyr-Grid® 12" (304.8 mm) FiberRunner® QuikLock™ Trapeze Bracket is made of steel and is black powder coated. It is 12.2" (309.9 mm) high, 12.7" (321.6 mm) long, 2.3" (58.4 mm), and 12.7" (321.6 mm) deep. It attaches to the Wyr-Grid® 12" (304.8mm) wide

Category: Cable Tray Trapeze Hangers

Cover coupler fittings. Used to join two pieces of cove raceway cover together.

Category: Straight Cable Tray Covers

Office Furniture Raceway Snap-on HorizonSnap-on single gang horizontal sloped communication faceplate. Accepts up to four PANDUIT® Mini-Com® Modules (not included). No additional mounting hardware required. TIA/EIA-606-B compliant.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Used to carry the cables throughout the Fiber-Duct Routing System. Accepts cover C4LG6. Cover sold separately.

Category: Straight Channel Cable Tray

Panduct® type HN hinged cover narrow slot wiring duct, 2 W x 3 H, 6' length, PVC, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Attaches to 4x4 channel and/or fittings to create a 90° vertical turn down from a straight horizontal run. Accepts optional split cover FROVRASC4YL.

Category: Elbows & Bends

Duct cover, 4 W x 6' length, PVC, orange, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Entrance end fitting for LD2P10 raceway. Breakouts for 1/2" and 3/4" diameter conduit. Off White.

Category: 1-Piece Non-Metallic Raceway End Fittings

2in x 2in coupler fitting used to join two sections of duct together. Fiber-Duct™ Coupler is not required at each fitting connection, Black.

Category: Wireway U-Connectors

The L-bracket with quick mount clip is used for installing the CWD4 corner wiring duct. It is made of low-carbon steel and spring steel and comes in a package of 16 pieces. The recommended fastener size is #10 – 32 x 1/2" (not

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Attaches to 12x4 channel and/or fittings to create a 90° vertical turn down from a straight horizontal run. Accepts optional split cover FROVRASC12YL.

Category: Elbows & Bends

Optional split cover for the horizontal right angle fitting FRRA4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: Elbows & Bends

Attaches to 12x4 channel and/or fittings to create a horizontal four way cross intersection with two 4x4 exits.

Category: Tees, Crosses & Junctions

Pre-assembled 12in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Orange, 1 piece.

Category: Couplers & Joiners

SLD DUCT NMTG PVC 3IN X5IN X6FT WHT 6FT

Category: 2-Piece Non-Metallic Raceway

Attaches to a 12x4 channel and/or fittings to create a horizontal four way cross intersection with two 4x4 exits, Black.

Category: Tees, Crosses & Junctions

The fiber routing spill-over junction is used to fully enclose a 6x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. The cover snaps onto the channel base. A hinged feature allows easy access to add or remove cables. It is yellow and made

Category: Drop-Offs, Spillouts & Outlets

Panduct® type F narrow slot wiring duct, 3 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT .

Category: High Density Wire Duct

Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from 6x4 channel, 6x4 horizontal tee fitting, or 6x4 exit on 12x4 vertical tee, Yellow.

Category: Drop-Offs, Spillouts & Outlets

The fiber routing vertical tee attaches to a 6x4 channel and/or fittings to create a 90° vertical drop from a straight horizontal run. A hinged door is included. It accepts FTR4X4YL, FIDT4X4BL, S4X4YL6, or E4X4YL6 directly. It also accepts optional snap-o

Category: Tees, Crosses & Junctions

Single gang faceplate frame accepts two 1/2 size module inserts or three 1/3 size module inserts, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

The optional split cover for the reducer fitting FRRF126YL is yellow and made of ABS plastic. The snap-on feature allows the cover to be installed and removed with no tools required. It creates a radiused 3/4" (19mm) opening for easy access to add or remo

Category: End Caps & Reducers

Attaches to 12x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. Inside divider walls manage cables routed around horizontal right angles. Accepts optional split cover FRRASC12BL.

Category: Elbows & Bends