Search results

Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1", and 1 1/4" which allows entry from ceiling or wall. International Gray.

Category: 1-Piece Non-Metallic Raceway End Fittings

Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD5, LDPH5, and LDS5 raceway, Electric Ivory, PVC, Length 0.81 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Attaches to 4x4 channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FROV454X4OR to change level of a straight horizontal run. Includes split cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Attaches to 24x4 channel and/or fittings to create a horizontal four way cross intersection with two 24x4 exits. Accepts optional split cover FRFWCCV24YL.

Category: 1-Piece Non-Metallic Raceway Elbows

12 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Black.

Category: 1-Piece Non-Metallic Raceway End Fittings

Attaches to 12x4 channel and/or fittings to create a 90° horizontal branch with a 12x4 exit from straight horizontal run. Accepts optional split cover FRTSC12BL.

Category: 1-Piece Non-Metallic Raceway Elbows

Base coupler fitting. Used for joining sections of Twin-70 base together. White.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Attaches any 6x4 FiberRunner® Fitting or Channel to any 4x4 FiberRunner® Fitting or Channel. Accepts split cover FRRF6FR4SCBL.

Category: 1-Piece Non-Metallic Raceway Elbows

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 1 piece.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Attaches to 4x4 channel base and/or fittings to create a 90° vertical turn down from a straight horizontal run. Accepts optional split cover FROVRASC4OR.

Category: 1-Piece Non-Metallic Raceway Elbows

Used to limit the bend of the fiber cable to 2 (50.4 mm) when exiting from 4x4 FiberRunner® Channel or a FiberRunner® Horizontal Tee, Orange.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Attaches to 12x4 channel and/or fittings to create a 90° horizontal branch with a 4x4 exit from straight horizontal run. Accepts optional split cover FRTSC12W4BL.

Category: 1-Piece Non-Metallic Raceway Elbows

Outside corner fitting. Used to join cove raceway at outside corners. Maintains a minimum 1" bend radius of cabling.

Category: 1-Piece Non-Metallic Raceway Elbows

Outside corner fitting for use with LDPH3 and LDS3 raceway, Electric Ivory, ABS, Length 1.05 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Bend radius control trumpet for exiting at the sidewall of 2 wall heights of type G, FS, E, or S Fiber-Duct Channels.

Category: 1-Piece Non-Metallic Raceway Elbows

TG-70 Base Coupler FittingBase coupler fitting. Each piece includes two base coupler halves for joining sections of TG-70 base together.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2LG or FIVRA4X4LG to change level of straight horizontal runs. Cover included.

Category: 1-Piece Non-Metallic Raceway Elbows

Optional split cover for the four way cross fitting FRFWC4X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. White.

Category: 1-Piece Non-Metallic Raceway End Fittings

Attaches to 6x4 channel base and/or fittings to create a 90° vertical drop from horizontal runs. Hinged door included. Accepts FIDT4X4BL, FTR4X4BL, S4X4BL6, E4X4BL6 directly. Accepts optional snap-on cover FRHC6BL6 in conjunction with channel.

Category: 1-Piece Non-Metallic Raceway Elbows

Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from the 12x4 channel or a 12x4 horizontal tee, Black.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Optional split cover for the 6x4 FiberRunner® to 4x4 FiberRunner® Reducer Fitting FRRF6FR4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Attaches to 12x4 channel and/or fittings to create a 90° horizontal branch with a 12x4 exit from straight horizontal run. Accepts optional split cover FRTSC12YL.

Category: 1-Piece Non-Metallic Raceway Elbows

Raceway Spill Over FittingSpill-over fitting. Allows transition from office furniture raceway run horizontally along partition wall to office furniture vertical raceway in one location. Adjustable fitting maintains 1in minimum bend radius of cabling and works with various panel wi

Category: 1-Piece Non-Metallic Raceway Clips & Couplings