Search results

Copper Patch Cord, Cat 6, Green UTP Cable, 28 Feet

Category: Category 6 Patch Cords

Category 6, UTP patch cord with TX6™ PLUS Modular Plugs on each end. Orange, 20 ft.

Category: Category 6 Patch Cords

Polypropylene insulated ferrules single wire blue DIN color expanded short circuit protection end sleeve, 14 AWG (2.5mm²), .47(12.0mm) pin length.

Category: Single Insulated Ferrules

Two module space, 1/2-size, sloped insert accepts two Mini-Com® Modules, Black.

Category: Multimedia Outlet System Wallplate Inserts

Fiber Indoor-Outdoor Central Tube Cable, Plenum (OFNP), 50um Multimode OM4 12 Fibers

Category: Multimode Fiber Optic Cable

Super-Tack continuous tape, polyester, black, 2 inches wide x 100 feet long.

Category: Labeling Tape

Copper Patch Cord, Category 6, Gray UTP Cable, 18 Feet

Category: Category 6 Patch Cords

Harness elastic retainer, .50" (12.7mm) bundle, #6 Screw (M3), standard package.

Category: Cable Tie Bases

Harness replacement elastic band for RER.75-S6-X.

Category: Cable Tie Bases

Wire Joint, 2 #16 - 4 #10 AWG, bulk package.

Category: Steel Crimp Connectors

Compression Lug, Copper, 2-Hole, Flex, 1/0 AWG Wire, 3/8 Stud Hole, 1 Hole Spacing

Category: 2-Hole Copper Compression Lugs

The laser/ink jet self-laminating adhesive label is made of polyester is supplied on 8.5 x 11" (203.2 x 292.1 mm) sheets with 8 labels per row and 32 labels per sheet. The label has a yellow colored print-on area 0.75" (19.1 mm) high for Category 6 FTP,

Category: Self-Laminating Labels

Category 5e performance, 28 AWG UTP patch cord with Pan-Plug™ Modular Plugs on each end. Off White. 6 ft.

Category: Category 5e Patch Cords

Cable Tie, Nylon, Standard Cross Section, Black, 14.5 Inch Long, .190 Inch Wide, 4" Maximum Bundle Diameter, 50 Pound Minimum Loop Tensile Strength, Pack of 100

Category: Non-Releasable Cable Ties

Super-Tack continuous tape, Red, 2.00 inches wide x 100.0 feet long

Category: Labeling Tape

Sta-Strap® Cable Ties have a unique design that ties directly to a chassis or panel without separate fasteners or mounting devises. Plus, with heat stabilized weather-resistant Nylon material, it's ideal for high-vibration, high-UV environments up to 239

Category: Edge Clip Cable Ties

Wire Marker Card, Vinyl Cloth, Red

Category: Wire Marker Cards

Pan-Steel® Self-locking Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, the smooth edges of 304 stainless steel promote worker safety in indoor environments. Heavy cross section, Max bundl

Category: Non-Releasable Cable Ties

Tee fitting for use with LD10 raceway, International Gray, ABS, Length 3.4 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Wire Joint, 2 #14 - 3 #12 AWG, bulk package.

Category: Steel Crimp Connectors

Metric ring terminal, 1.0 – 2.5mm²+ + wire range, M5 stud size, bulk package.

Category: Non-Insulated Ring Tongues

Ring Terminal, 26 – 22 AWG, #6 stud size, bulk package.

Category: Non-Insulated Ring Tongues

The vibration resistant male tab disconnect in metallic brass helps overcome the failures caused by high vibration. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.69" (17.4 mm) long and 0.

Category: Male Non-Insulated Wire Disconnects

Screw-on beam clamp for up to 1/2" flange with 1/2 - 3/4" conduit clip - side mount, static load capacity: 25 lbs.

Category: Beam Clamps - Adjustable