Search results

Category 6, RJ45, 8-position, 8-wire shielded spring shuttered universal jack module. Yellow.

Category: Snap-In Cat 6 Jack Inserts

The Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco Catalyst 6504-E switch intakes from above, below and the side. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energ

Category: Central Vacuum Exhaust Vents

Category 6A, RJ45, 8-position, 8-wire shielded spring shuttered universal jack module, Yellow.

Category: Snap-In Cat 6A Jack Inserts

The Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco Catalyst 4900M switch intakes from in-line and the side. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energy effi

Category: Central Vacuum Exhaust Vents

The vibration resistant male tab disconnect is made of brass and is nickel-plated. It is fully insulated in a blue, nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.91" (23.1

Category: Male Nylon Insulated Wire Disconnects

The vibration resistant DiscoGrip™ male disconnect is made of brass and is nickel-plated. It is fully insulated in red premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.

Category: Male Nylon Insulated Wire Disconnects

Opticom® MPO FAP loaded with eight (8) key-up/key-down MPO fiber optic adapters, oriented horizontally for Opticom® or Opticom® QuickNet™ Patch Panels and Fiber Enclosures, black.

Category: SC Fiber Distribution Plates

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, standard receptacle nylon housing. It has a tab size of 0.187/0.205 x 0.032" (4.8/5.2 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 m

Category: Female Nylon Insulated Wire Disconnects

Latching flat cable holders, 2" (50.8mm) cable width, gray, standard package.

Category: Cable Tie Bases

Latching flat cable mount, 2" (50.8mm) cable width, gray, standard package.

Category: Cable Tie Bases

Latching flat cable mount, #6 screw (M3), 1.20" (30.5mm) cable width, gray, standard package.

Category: Cable Tie Bases

Category 6A, UTP module, 8 pos 8 wire, 28/30 AWG, Universal, Violet, TG Style.

Category: Snap-In Cat 6A Jack Inserts

Thermal transfer raised panel push button label, 2.40" W x 2.40" H, raised panel, yellow, 1 label/row, 500 pc. package quantity.

Category: Permanent Labels

The fixed diameter cable clamp uses a #8 (M4) screw and has a maximum bundle diameter of .19" (4.8mm) . It is white and comes in packages of 1000.

Category: Cable Clamps & Clips

Two module space, 1/2-size, sloped insert accepts two Mini-Com® Modules, White.

Category: Multimedia Outlet System Wallplate Inserts

4RU Horizontal Flat Rack Filler Panel

Category: Rack Filler Panels

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is insulated in red nylon. It has a tab size of 0.205/0.187 x 0.020 (5.2/4.7 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.78" (1

Category: Female Nylon Insulated Wire Disconnects

The Tak-Ty hook and loop cable tie mount in black is mounted with a rubber adhesive. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/HL

Category: Cable Tie Bases

Network label, P1 cassette, 1.38" W x 0.19" H, polyolefin, white, 200 labels/cassette, 1 pc. package quantity.

Category: Permanent Labels

StrongHold Cable Tie, 16.93L (430mm), Standard, Nylon, Natural

Category: Non-Releasable Cable Ties

Marker plate, four holes, 304 Stainless Steel, heavy cross section, 3.50" x .75", bulk package.

Category: Cable Tie Marker Plates

J-PRO Cable support system, with c-purlin clip for use with vertical flanges up to 1/4 (6.4mm) thick, 0.75 (19.0mm) max. bundle capacity, nylon 6.6 with metal attachments, black, 50 pc. package quantity.

Category: J-Hook From Wire/Rod & Beam

Compression Lug, Copper, 1 Hole, Flex, 4/0 AWG Wire, 5/8 Stud Hole., 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs

Screw-on single gang blank cover faceplate. Supplied with two mounting screws, Off White

Category: 1-Gang Decorator Wallplates