Search results

6.00' (1.8m) Vinyl Coated Galvanized Steel Cable with Loophole (Cable Only).

Category: Cable Lockouts

Thin wall heat shrink, .19" (4.8mm) diameter, orange cross-linked polyolefin, 25 pc. package quantity.

Category: Thin Wall Heat Shrink

Underground hazard tape, 6.00" H x 1000' length, 'Caution fiber optic cable buried below' (legend), detectable laminated aluminum, black/orange, 1 pc. package quantity.

Category: Detectable Underground Tape

Pan-Ty® locking tie, miniature cross section, 3.9 (99mm) length, nylon 6.6, orange, standard package.

Category: Miniature Cable Ties

J-PRO Cable support system, with hammer-on beam clamp for use with flanges 5/16 1/2 (7.9mm 12.7mm) thick, rotates 360 degrees, 4.00 (101.6mm) max. bundle capacity, nylon 6.6 with metal attachments, black, 10 pc. package quantity.

Category: J-Hook From Wire/Rod & Beam

Thin wall heat shrink, .38" (9.5mm) diameter, white cross-linked polyolefin, 100 ft. (30.5m) per reel.

Category: Thin Wall Heat Shrink

Pan-Ty® releasable lashing tie, extra-heavy cross section, 40.1 (1019mm) length, nylon 6.6, natural.

Category: Releasable Cable Ties

Mechanical Lug, Copper, 1-Hole, Single Barrel, Straight Floating Tongue, Slotted Screw, #2 - 1/0 AWG, 1/4 Inch Stud Hole.

Category: 1-Conductor Copper Mechanical Lugs

Black on yellow, vinyl tape. Width: 0.38".

Category: Labeling Tape

Terminal Kit, Various Selection, 17 Slots

Category: Small Wire Terminal Kits

Heat Shrink End Cap, Adhesive Lined, 2.5:1 Shrink Ratio, Minimum Expanded: 0.47 Inch/Maximum Recovered: 0.18 Inch, Color: Black, Material: Cross-Linked Polyolefin

Category: Heat Shrink End Caps

Panduit Pan-Steel® L buckles are designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for harsh conditions. For use with 0.6" (16mm) strapping, 100pc.

Category: Cable Straps

White on red, vinyl tape.

Category: Labeling Tape

Pan-Wrap™ split harness wrap, 1.5" (38.1mm), 50 ft. (15m) per reel, polyethylene, natural.

Category: Split Wall Loom Tubing

Thin wall heat shrink, .75" (19.0mm) diameter, orange cross-linked polyolefin, 5 pc. package quantity.

Category: Thin Wall Heat Shrink

Panduct® solid divider wall, 2.00" nominal duct height, 6' length, PVC, white.

Category: Wall Duct Dividers

J-PRO Cable support system, with screw-on beam clamp for use with flanges up to 3/4 (19.1mm) thick, rotates 360 degrees, 1.31 (33.3 mm) max. bundle capacity, nylon 6.6 with metal attachments, black, 50 pc. package quantity

Category: J-Hook From Wire/Rod & Beam

Cable Tie Tool, Low Volume, For use with Lt-Hvy, Hvy and Extra-Hvy Ties

Category: Cable Tie Tools

Dome-Top® barb ty clamp tie, standard cross section, #10 (M5) screw, 8.5 (216mm) length, weather resistant nylon 6.6, black, bulk package.

Category: Screw Mount Cable Ties

Multiple Tie Plate, Length: 6.75", Uses #10 (M5) Screws, 6.6 Nylon, Indoor, Natural, Package of 100

Category: Cable Tie Bases

Copper cable, enhanced category 6 U/UTP, riser (CMR), 4-pair, conductors are 23 AWG construction with polyolefin (PE) insulation, twisted in pairs, separated by an integrated pair divider, and protected by a flame-retardant PVC jacket. Packaged in an easy

Category: Category 6 Non-Plenum Cable

Panduct® type G wide slot wiring duct, 1.5 W x 4 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Compression Lug, Copper, 1-Hole, Standard Barrel with Window, 2/0 AWG Wire, 90° Angle Tongue, 1/4 Stud Hole

Category: 1-Hole Copper Compression Lugs

Crimp dies for CT-920, CT-920CH, CT-930, CT-930CH and CT-2920 tools, 400 kcmil.

Category: Wire Crimping Dies, Adapters, & Blades