Search results

The push button cable tie mount requires a 0.25" (6.4 mm) hole and is natural color. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

The Panduit® PatchRunner® 2 End Panel provides a professional, clean aesthetic by closing off the end row of Panduit PR2V 96in managers. 52RU, Black, 1pc.

Category: Rack Cable Management Devices

2 fiber OS2, SC duplex to SC duplex patch cord, 3mm jacket, riser (OFNR) rated, Std IL 5 meters

Category: Fiber Optic Patch Cords

The Net-Direct™ Air Exhaust Duct routes exhaust air from the side of the Cisco 7009 switch in a 42in (1070mm) wide Net-Access™ N-Type Cabinet switch into the hot aisle, preventing hot air from mixing with cool air within the cabinet. Not only does it requ

Category: Central Vacuum Exhaust Vents

Latching flat cable mount, 3.25" (82.6mm) cable width, gray, bulk package.

Category: Cable Tie Bases

LC 10Gig™ OM3/OM4 FAP loaded with eight LC 10Gig™ Duplex Multimode Fiber Optic Adapters (Aqua) with zirconia ceramic split sleeves.

Category: LC Fiber Distribution Plates

Fiber Indoor Distribution Cable, Plenum (OFNP), 50um Multimode OM4 48 Fibers

Category: Multimode Fiber Optic Cable

Three digit combination lock with key over ride for single hinge or split doors.

Category: Panelboard Replacement Keys & Trim Locks

Thermal transfer raised panel component label, 3.00" W x 2.50" H, raised panel, black, 1 labels/row, 500 pc. package quantity.

Category: Permanent Labels

Mini Com sloped modular furniture faceplate for knockouts found on Herman Miller furniture such as Ethospace Beltline. Accepts four Mini-Com® Modules. Includes label and label cover. Black

Category: Furniture Wallplate Inserts

The vibration resistant DiscoGrip™ female disconnect is made of brass and is tin-plated. It is fully insulated in blue premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.

Category: Female Nylon Insulated Wire Disconnects

Used to carry the cables vertically to the front or the back of equipment racks throughout the system. Accepts cover C4BL6. Extra supports required when used in horizontal applications, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT Cover sold separately.

Category: Special Purpose Wire Duct

End cap fitting for use with LDPH3 and LDS3 raceway, Electric Ivory, ABS, Length 0.87 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Flat cable mounting system, FCPI plate, 2" (50.8mm) cable width, black, standard package.

Category: Cable Tie Bases

Fiber Indoor 2.9mm Interconnect Cable, Plenum (OFNP), 50um Multimode OM4 2 Fibers

Category: Multimode Fiber Optic Cable

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 1.5" long x 1.5" wide (38.1 x 38.1 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with mini

Category: Cable Tie Bases

Adhesive backed cord clip, high temp, .62" (15.8mm) bundle, weather resistant, black, standard package.

Category: Cable Clamps & Clips

Adhesive backed dual cord clip, high temp, .33" (9.0mm) bundle, white.

Category: Cable Clamps & Clips

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.187/0.205 x 0.020 (4.8/5.2 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.

Category: Female Nylon Insulated Wire Disconnects

6POSKEY(H AQ) DPLX LC ADPTRPNL EA

Category: LC Fiber Distribution Plates

Keyed LC FAP loaded with six LC (keyed P – white) duplex fiber optic adapters with zirconia ceramic split sleeves.

Category: LC Fiber Distribution Plates

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 1/

Category: Heat Cable Brackets & Clips

OM3 2-fiber, 1.6mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std. IL

Category: Fiber Optic Patch Cords

Adjustable and releasable clamp, .69" (17.5mm) bundle, gray, standard package.

Category: Cable Clamps & Clips