Search results

AVT System Cable for use with VeriSafe AVT device. Cable length is 2 ft.

Category: Absence of Voltage Testers

StrongHold™ Cable Tie, 40.16L (1020mm), Heavy, Nylon, Natural, Package 10

Category: Non-Releasable Cable Ties

StrongHold™ Cable Tie, 20.98L (533mm), Light-Heavy, Nylon, Natural,Package 50

Category: Non-Releasable Cable Ties

Optional snap-on hinged cover for channel FR4X4BL6. Hinge feature enables positioning of cover at angles between 30° to 90°.

Category: Covers & Retainers

Category 6, UTP patch cord with TX6™ PLUS Modular Plugs on each end. Yellow, 18 ft.

Category: Category 6 Patch Cords

1/3 insert with 9-pin female to female coupler, white.

Category: Multimedia Outlet System Wallplate Inserts

OM3 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std IL 1m

Category: Fiber Optic Patch Cords

P1 Cassette, Continuous Heatshrink Tubing, Mil Grade Polyolefin, 8' W x .25" H, Yellow

Category: Heat Shrink Wire Marker Labels

Category 5e, RJ45, 8-position, 8-wire spring shuttered universal jack module. Black.

Category: Snap-In Cat 5e Jack Inserts

This Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco Nexus 7009 switch intakes from above and below. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energy efficiency a

Category: Rack Shelves

The vibration resistant male disconnect is made of brass and is nickel-plated. It is fully insulated in red premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.9" (22.9 mm

Category: Male Nylon Insulated Wire Disconnects

The fiber mounting 2-piece ladder rack bracket attaches to either a 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or a 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. The bracket halves slide into position and clamp together on the ladder rack rail, which allows

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Panduct® type F narrow slot wiring duct, 1.5 W x 4 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Fiber Indoor-Outdoor Central Tube Cable, Plenum (OFNP), 50um Multimode OM4 12 Fibers

Category: Multimode Fiber Optic Cable

Drop ceiling/entrance end fitting for use with LD10 raceway, International Gray, ABS, Length 2.25 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

4-Way Adhesive Backed Cable Tie Mount, 1.12" x 1.12" (28.5mm x 28.5mm), Weather-Resistant, Nylon 6.6, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

2 fiber OM1 LC Duplex to LC Duplex OFNR (riser) rated 16mm jacketed cable Std IL 50m

Category: Fiber Optic Patch Cords

2-FIBER OM1 LC-LC DUPLEX RISER 40M

Category: Fiber Optic Patch Cords

Optional snap-on cover for channel FR24X4YL10. Supplied in four 30 long pieces.

Category: Covers & Retainers

Flat cable clips, any width flat cable, .56" (14.2mm) width, gray,standard package.

Category: Edge Clip Cable Ties

The 4-way adhesive backed cable tie mount in ivory is applied with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniatur

Category: Cable Tie Bases

4-Way Adhesive Backed Cable Tie Mount, 1.12" x 1.12" (28.5mm x 28.5mm), Nylon 6.6, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

Adhesive backed mount cord clip, .22"-.28" (5.6mm - 7.7mm) bundle, white.

Category: Cable Clamps & Clips

Adhesive backed "J" clip, .19" (4.8mm) bundle, light gray, standard package.

Category: Cable Clamps & Clips