Fittings

Optional split cover for the horizontal tee with 4x4 exit fitting FRT12X4W6BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: Tees, Crosses & Junctions

Used to fully enclose 12x4 channel in conjunction with the Spill-Over Junction FRSPJ2X2BL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

Provides secure, accessible route for cables spilling out from vertical tee to rack mounted equipment. Kit includes 6ft length of 4x4 capacity hinged duct, 6ft length of 4x4 hinged duct cover, one end cap for 4x4 hinged duct, three FZBA1.5X4 adjustable Z

Category: Drop-Offs, Spillouts & Outlets

Pre-assembled 6in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 20 pieces.

Category: Couplers & Joiners

Fitting that transitions from ADC's 4x4 FiberGuide System to 4x4 FiberRunner® System. Fitting has a black finish and is made from metal. Attachment hardware is included.

Category: Couplers & Joiners

The fitting attaches any 6" x 4" (150mm x 100mm) FiberRunner® fitting or channel to the 4" x 4" (100mm x 100mm) Fiber-Duct™ Channel S4X4YL6 or E4X4YL6. It is yellow and made of ABS plastic. It includes a solid cover.

Category: End Caps & Reducers

4x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid

Category: Drop-Offs, Spillouts & Outlets

6x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid

Category: Drop-Offs, Spillouts & Outlets

Provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Kit includes 6' length of 2x2 FiberRunner® Hinged Channel H2X2BL6, 6' length of 2x2 snap-on hinged cover HC2BL6, four adjustabl

Category: Drop-Offs, Spillouts & Outlets

Used to fully enclose 12x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

The optional cover for the reducer from 24x4 FiberRunner® to 12x4 FiberRunner® FRRF2412BL is black and made of ABS plastic. The snap-on feature allows the cover to be installed and removed with no tools required.

Category: End Caps & Reducers

Attaches any 4x4 FiberRunner® Fitting or Channel to the 4x4 Fiber-Duct™ Channel, S4X4YL6 or E4X4YL6. Includes solid cover.

Category: End Caps & Reducers

PDT FRTSC12W6LYL SPLIT COVER,

Category: Tees, Crosses & Junctions

PDT FRSPJC44LBL SPILL-OVER JU

Category: Drop-Offs, Spillouts & Outlets

PDT FREC24X4LYL FITTING, END

Category: End Caps & Reducers

PDT FRRA6X4LBL FITTING, HORIZ

Category: Elbows & Bends

PDT FRT12X4W6LBL FITTING, HOR

Category: Tees, Crosses & Junctions

FIBERRUNNER 4-WAY CROSS FITTING 24X4

Category: Tees, Crosses & Junctions

PDT FROVRA12X4LYL FITTING, OU

Category: Elbows & Bends

PDT FROVRASC4LBL SPLIT COVER,

Category: Elbows & Bends

PDT FRFWC4X4LBL FITTING, 4-WA

Category: Tees, Crosses & Junctions

PDT FRRF126LSCLYL SPLIT COVER

Category: End Caps & Reducers

PDT FRVT12X4LYL FITTING, VERT

Category: Tees, Crosses & Junctions

PDT FR1.5IDELYL FITTING, 1-PO

Category: Drop-Offs, Spillouts & Outlets