Fiber Raceway Systems

FIBERRUNNER 6IN X4IN COVER SNAP-ON HINGED

Category: Covers & Retainers

PDT FRTSC6LYL SPLIT COVER, HO

Category: Tees, Crosses & Junctions

PDT FRSPJC44LYL SPILL-OVER JU

Category: Drop-Offs, Spillouts & Outlets

FIBERGUIDE 4-INCH EXPRESS EXIT COVER NOT INCLUDED 4X4 4X6 4X12IN YELLOW

Category: Drop-Offs, Spillouts & Outlets

FIBERGUIDE SNAP-FIT JUNCTION 4X12IN YELLOW

Category: Couplers & Joiners

FIBERGUIDE HORIZONTAL STRAIGHT SECTION 4X12IN YELLOW

Category: Straight Sections

FIBERGUIDE 45 DEG DOWN ELBOW 4X12IN YELLOW

Category: Elbows & Bends

FIBERGUIDE 45 DEG UP ELBOW 4X12IN YELLOW

Category: Elbows & Bends

4x4 Solid Duct With Cover (1/Carton), Color: Yellow

Category: Straight Sections

The FiberRunner® 6x4 Channel can be used with fittings and brackets to design a routing system to segregate, route, and protect fiber optic and high-performance copper cables. The cable routing channel accepts cable retainers or a hinged cover.

Category: Straight Sections

4x4 Solid Duct Without Cover (1/Carton), Color: Yellow

Category: Straight Sections

FiberRunner QuikLock New Threaded Rod Bracket

Category: Mounting Hardware & Brackets

Horizontal Tee for FiberRunner® 12x4 Routing System, Yellow

Category: Tees, Crosses & Junctions

Attaches to 4x4 channel and/or fittings to create a horizontal four way cross intersection. Accepts optional split cover FRFWCSC4BL.

Category: Tees, Crosses & Junctions

Optional snap-on cover for channel FR24X4BL10. Supplied in four 30 long pieces.

Category: Covers & Retainers

Optional cover for the four way cross fitting FRFWC24X4YL. Snap-on feature allows cover to be installed and removed with no tools required.

Category: Tees, Crosses & Junctions

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Category: Mounting Hardware & Brackets

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with tw

Category: Mounting Hardware & Brackets

Used to support the 12x4 system, dual 6x4, or dual 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 12" (305mm) allowing runs to be leveled over uneven cabinet heights. Bracket is secured to the cabinet frame with through bo

Category: Mounting Hardware & Brackets

The fitting transitions from ADC's 12x4 FiberGuide System to the Panduit 12x4 FiberRunner® System. It is black and made of metal. Attachment hardware is included.

Category: Couplers & Joiners

Used to carry the cables horizontally throughout the system. Accepts hinged cable retainers FRCR6BL-X, hinged cover FRHC6BL6 or split hinged cover FRSHC6BL6. Use QuikLock Coupler FRBC6X4BL to attach channel and/or fittings.

Category: Straight Sections

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly

Category: Mounting Hardware & Brackets

Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary, Black, 10 pc.

Category: Couplers & Joiners

Used to support the 6x4 and 4x4 systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Thread

Category: Mounting Hardware & Brackets