Search results

Two-hole, standard barrel lug with window, #8 AWG wire, 3/8 stud hole, 1 hole spacing.

Category: 2-Hole Copper Compression Lugs

The thermal transfer Turn-Tell label made of vinyl has an innovative design that allows it to rotate to any angle for improved visibility, aesthetics, and easy repositioning on wires and cables. The label has a print-on area 0.50 (12.7 mm) high. It can ea

Category: Repositionable Labels

Fork Terminal, Nylon Insulated, 16 - 14 AWG, 600 Volt, Metric Stud: M3, Color: Blue, Material: Copper, Package of 100 Each.

Category: Nylon Insulated Standard Fork Terminals

Braided Expandable Sleeving, 0.75" diameter (19.1mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, gray, Flame Retardant, Polyethylene Terephthalate, 100 ft. per reel.

Category: Braided Expandable Sleeving

TX6 PLUS Non-Keyed Patch Cord, CAT6, UTP, TX6 PLUS RJ45 Modular Plugs on Each End, 24 AWG, Copper, Gray, 5' Length

Category: Category 6 Patch Cords

Netkey copper patch cord, category 6, 10 ft., green UTP cable.

Category: Category 6 Patch Cords

Black on white, polyolefin module label tape.

Category: Labeling Tape

Compression Lug, Copper, 1-Hole, Flex, #6 AWG Wire, 3/8" Stud Hole, 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs

Panduct® type G wide slot wiring duct, 2 W x 2 H, 6' length, PVC, adhesive, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

The pan-post standoff is natural color and requires a #10 (M5) screw. It measures 1.06"L x .72"W x 1.97"H (26.9 x 18.3 x 50.0 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 10.

Category: Cable Tie Bases

4X5REPLACEMENTCOVERKIT EA

Category: Rack Cable Management Devices

Cable Tie Mount, Applied with #8 (M4) Screws, 0.43" Wide, Weather-Resistant Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

Clip-On Wire Markers, .11-.13 Wire OD, Black/White 300 PC, Legend: '3'.

Category: Clip-On Wire Markers

Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 12ft.

Category: Category 6 Patch Cords

The white resin thermal transfer ribbon for Panduit's TDP4-HE series printer is part of the complete line of identification solutions from Panduit. Measuring 1181' (363m) long and 4-H polyester labels, continuous vinyl tape, marker plates, and raised pane

Category: Label Printer Ribbons

Solid hinged duct, 1.5 W x 2 H, 6' length, PVC, white, no mounting holes, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Pan-Ty® locking tie, light-heavy cross section, 34.3 (871mm) length, nylon 6.6, natural, standard package.

Category: Non-Releasable Cable Ties

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end. Yellow, 8 in, 48pc.

Category: Category 6 Patch Cords

The cable tie mount in black is applied with a #8 (M4) screw and is 0.43" (10.9 mm) wide. It is made of weather-resistant polypropylene for outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Red, 8in.

Category: Category 6 Patch Cords

Harness Board Nail, Length: 2 Inch, Material: Steel/Nickel Plated, For Indoor Use Only.

Category: Nail Straps

Fixed diameter cable clamp, heavy duty, #10 screw (M5), .38" (9.7mm) bundle, white, bulk package.

Category: Cable Clamps & Clips

Duct Corner Strip, 6' Length, Light Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Dome-Top® barb ty cable tie, standard cross section, 8.0 (203mm) length, nylon 6.6, blue.

Category: Non-Releasable Cable Ties