Search results

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in red vinyl housing. It has a tab size of 0.187 x 0.032" (4.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.76" (19.3 mm) long

Category: Female Vinyl Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in a blue, nylon housing. It has a tab size of 0.110 x 0.020" (2.8 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.75" (19.1 mm) l

Category: Female Nylon Insulated Wire Disconnects

Male Disconnect, Nylon Insulated, 16 - 14 AWG, Tab: 0.25 x 0.032 Inch, Material: Brass, Color: Blue, Package of 50 Each.

Category: Male Nylon Insulated Wire Disconnects

Fiber Indoor-Outdoor Tight Buffered Cable, Plenum (OFNP), 50um Multimode OM4 24 Fibers

Category: Multimode Fiber Optic Cable

The Net-Direct™ Air Exhaust Duct routes exhaust air from the side of the Cisco 7009 switch in a 42in (1070mm) wide Net-Access™ N-Type Cabinet switch into the hot aisle, preventing hot air from mixing with cool air within the cabinet. Not only does it requ

Category: Central Vacuum Exhaust Vents

The vibration resistant DiscoGrip™ female disconnect is made of brass and is tin-plated. It is fully insulated in blue premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.

Category: Female Nylon Insulated Wire Disconnects

Used to carry the cables vertically to the front or the back of equipment racks throughout the system. Accepts cover C4BL6. Extra supports required when used in horizontal applications, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT Cover sold separately.

Category: Special Purpose Wire Duct

Fiber Indoor 2.9mm Interconnect Cable, Plenum (OFNP), 50um Multimode OM4 2 Fibers

Category: Multimode Fiber Optic Cable

Panduct® type F narrow slot wiring duct, 4 W x 4 H, 6' length, PVC, adhesive, white.

Category: High Density Wire Duct

The epoxy applied cable tie mount kit in black is made of two-part epoxy and nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It includes 4 epoxy cups, 4 mixer sticks, 4 EMS mounts, and 12 cable ties. It is used wit

Category: Cable Tie Bases

Panduit Elastomeric Cable Ties are built with a locking head design to increase productivity. Thermoplastic polyurethane bundles and protects network data without over-tensioning. They are not only flexible and elastic, but fully releasable to accommodate

Category: Rack Cable Management Devices

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.187/0.205 x 0.020 (4.8/5.2 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.

Category: Female Nylon Insulated Wire Disconnects

SC APC FAP loaded with four SC APC duplex singlemode fiber optic adapters (Green) with zirconia ceramic split sleeves.

Category: Fiber-Optic Connector Adapters

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod

Category: Mounting Hardware & Brackets

The screw applied mount for Tak-Ty hook and loop cable ties in natural uses #6 (M3) screw. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with

Category: Cable Tie Bases

Adjustable and releasable clamp, .69" (17.5mm) bundle, gray, standard package.

Category: Cable Clamps & Clips

Adhesive backed "J" clip, .38" (9.7mm) bundle, light gray.

Category: Cable Clamps & Clips

CORCLIPADH .50IN BDL GRY PK100

Category: Cable Clamps & Clips

CORDCLIP HITMPADH .19IN BDL NAT PK1000

Category: Cable Clamps & Clips

Thermal transfer raised panel component label, 1.00" W x 0.50" H, raised panel, yellow, 3 labels/row, 500 pc. package quantity.

Category: Permanent Labels

Mini Com adapter snaps into 0.827 x 0.827 (21mm x 21mm) opening and accepts one Mini-Com® Module. Panel thickness should be 0.046 to 0.056 (1.17mm to 1.42mm), White.

Category: Surface Mount Data, Video, & Audio Housings

Category 5e, RJ45, leadframe, 8-position, 8-wire universal module, Green.

Category: Snap-In Cat 5e Jack Inserts

Thermal transfer component label, 0.25" W x 0.25" H, polyester, white, 12 labels/row, 10,000 pc. package quantity.

Category: Permanent Labels

Thermal transfer component label, 0.50" W x 0.20" H, polyimide, white, 5 labels/row, 10,000 pc. package quantity.

Category: Permanent Labels