"2149V-F-LW"

Series C Motor Circuit Protector, Type Hmcp, F-frame, Intermediate Magnetic, 3 Poles, 7 Amp, 600 Vac, 250 Vdc, 21 - 70 Mag. Trip

Category: Molded Case Motor Circuit Protectors

Auxilliary Switch With Pigtail Leads, Left-pole Mounting, For F-frame Breaker, Contacts: 2a, 2b

Category: Molded Case Circuit Breaker Auxiliary Switches

BUS F09A250V10AS MILITARY MIL

Category: Military Fuses

Eaton Bussmann series F61 fuse, Military qualified fuse, Instruments, power and telephone, 3 A, Non-indicating, Standard, 500 V

Category: Military Fuses

BUS CGL-250 LIMITRON FAST ACT

Category: HRC Form II Current Limiting Fuses

BUS CGL-400 LIMITRON FAST ACT

Category: HRC Form II Current Limiting Fuses

BUS GMT-3/4A BUS INDICATING F

Category: Alarm Indicating Fuses

Eaton Bussmann series F61 fuse, Military qualified fuse, Silver-plated fuse caps, Instruments, power and telephone, 30 A, Non-indicating, Standard, 500 V

Category: Military Fuses

BUS F60C500V10A MILITARY MIL-

Category: Military Fuses

Infrared Camera, 640 x 480, 60 Hz, Resolution: 640 x 480 (307,200 Pixels), Field of View: 34 x 24°, Temperature Range: -4 to 1202°F

Category: Thermal Imagers

Contender Eds Series 1-gang 2 Circuit Push Button Switch, Action: Momentary, Contact Configuration: 2 No/2 Nc, Contact Rating: 10 Amp At 600 Vac, Actuator: Front Operated, Enclosure: Nema 3, 7cd, 9efg, Mounting: Surface Mount With 1 In Dead-end Hub, Material: Malleable Iron, Finish: Triple-coat (zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 5.31 In, Width: 3.72 In, Depth: 3.06 In, Legend: Start/stop, Standard: Ul 508, Ul 698, Ul 1203, E10449, E8 1203, E10449, E81751 Ul Listed, Class I, Division 1, Groups C, D , Class I, Division 2, Groups B, C, D Class Ii, Division 1 And 2, Groups E, F, G And Class Iii, For Remote Control Of Motors

Category: Explosion-Proof Pushbutton Pilot Devices

Contender EDSC Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Number Of Poles: 1, Actuator: Front Operated, Enclosure: NEMA 3, 7CD, 9EFG, Mounting: Surface Mount With 1 IN Feed-Thru Hub, HP Rating: 1 HP At 120 VAC, 2 HP At 240 VAC, Material: Aluminum Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 5.31 IN, Width: 3.72 IN, Depth: 5.31 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1, Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present

Category: Explosion-Proof Assembled Switches

BUS BD161NR 30A/1P HD 600VDC

Category: 600 Volt DC Rated Non-Fusible Disconnect Switches

Open Box Mounting Bracket, For Studs 16 Inch on Center, Accommodates 4 Inch and 4-11/16 Inch Square Boxes, Steel

Category: Metallic Box Supports

BOX STABILIZER, 3 1/2-IN. METAL STUD SIZE

Category: Metallic Box Supports

PVC Coated Malleable Elbow, Male-Female, 90 Degree, Pipe Size 3/4 Inch/21 Metric, EL Series for the End of Conduit Runs or to Change Directions, Malleable Iron, Gray

Category: PVC Coated Rigid Conduit Elbows

Four-Way and Two-Way Mounting Base With Open Leg Design, Black Nylon 6.6 for Temperatures up to 85 Degrees Celsius (185 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 8.5mm (0.33 Inches), Screw Mounting Method or Two-Component Glue, #8 Screw, Mounting Hole Size of 4.4mm (0.17 Inches), Bulk Pack

Category: Cable Tie Bases

Explosion-Proof Incandescent Light Fixture Lamp Socket; Type 200 To 300 W Mediumbase Lamp Socket; Used On A-51 Incandescent Factory Sealed Luminaire; Constructional Feature Explosion-Proof; Enclosure Class I Div 1 And 2 Group A B C D, Classii Div 1 And 2 Group E F G, Class Iii

Category: Lampholder Adapters & Extensions

Integrated Mounting Hole Cable Tie, Natural Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, Length of 150.98mm (5.94 Inches), Width of 3.5mm (0.138 Inch), Thickness of 1.03mm (0.041 Inch), Tensile Strength Rating of 177 Newtons (40 pounds), #8 Screw for Mounting, Bulk Pack

Category: Screw Mount Cable Ties

Lashing Cable Tie, Releasable Head with 6.9mm (0.27 Inch) Mounting Hole , Black Polypropylene for Temperatures up to 110 Degrees Celsius (230 F), Weather and Ultraviolet Resistant for Indoor and Outdoor Applications, UL/EN/CSA62275 Type 2/21S Rated for AH-2 Plenum and as a Flexible Cable and Conduit Support, Length of 462mm (18.187 Inches), Width of 13.2mm (0.52 Inches), Thickness of 1.93mm (0.076 Inches), Tensile Strength Rating of 670 Newtons (150 Pounds)

Category: Screw Mount Cable Ties

Cable Tie, Black Polypropylene for Temperatures up to 85 Degrees Celsius (185 F), Weather and Ultraviolet Resistant for Indoor and Outdoor Applications, Length of 92mm (3.6 Inches), Width of 2.3mm (0.09 Inch), Thickness of 1mm (0.04 Inch), Maximum Bundle Diameter 22mm (0.86 Inch), Tensile Strength Rating of 80 Newtons (18 Pounds)

Category: Non-Releasable Cable Ties

STL 820-D-2 SWITCH BOX SUPPOR

Category: Metallic Box Supports

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Nylon 6.6 material, it's ideal f

Category: Non-Releasable Cable Ties

Intermediate Cable Tie, Fluorescent Orange Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, Length of 215mm (8.46 Inches), Width of 3.6mm (0.14 Inch), Thickness of 1.25mm (0.049 Inch), Bundle Diameter 2mm (0.08 Inch) to 56mm (2.2 Inches), Tensile Strength Rating of 178 Newtons (40 Pounds)

Category: Non-Releasable Cable Ties