Raceway - Non-Metallic

Office Furniture Raceway, Non-Metallic, .88" x 1.71" x 6', Office Gray

Category: 1-Piece Non-Metallic Raceway

Optional split cover for the outside vertical 45° angle fitting FROV454X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Inside corner fitting – non-adjustable. Used to join sections of TG raceway at inside corners. Electric Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Optional split cover for the outside vertical right angle fitting FROVRA4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Low voltage drop ceiling/entrance end fitting for use with LD3 raceway, International Gray, ABS, Length 3.42 in.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Optional split cover for the horizontal right angle fitting FRRA4X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Reducer fitting for LD raceway from size 10 to size 3. For use with LD3 and LD10 raceway. For in-line terminations, use with CF10

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

FIBERRUNNER COVER 6X4 OR 6FT

Category: 2-Piece Non-Metallic Raceway Covers

T-45 reducer fitting to LD10 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Elbows

Four way cross fitting for use with LD5, LDPH5, and LDS5 raceway, Off White, ABS, Length 4.05 in, Width 4.05 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Tee fitting with divided insert to maintain separation of power and data cabling. For use with LD2P10 raceway, Electric Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Two channel tamper resistant one-piece latching surface raceway. Supplied with pre-applied adhesive backed tape. Available in 8' and 10' lengths.

Category: 1-Piece Non-Metallic Raceway

Reducer fitting for LD raceway from size 10 to size 3. For use with LD3 and LD10 raceway. For in-line terminations, use with CF10

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Reducer fitting for LD raceway from size 10 to size 5. For use with LD5 and LD10 raceway. White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

WM UTCM5 NON-METALLIC 3-COMPA

Category: Non-Metallic Overfloor Raceway

Wall Duct Fitting, T-Unit, Body, 10"

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Kd G969ap StripKin G-969ap Plastic Closure strip - Gold

Category: 2-Piece Non-Metallic Raceway Covers

Outside corner fitting for use with LDPH5 and LDS5 raceway, White, ABS, Length 1.25 in.

Category: 1-Piece Non-Metallic Raceway Elbows

PAN CFX10AW-X EIA/TIA LD/CD10

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.

Category: 2-Piece Non-Metallic Raceway

Non-Metallic, Flexible Corduct. 1200 Series. Size: 5' Length, 2-1/2" Width, 14/32" Height. Color: Brown.

Category: Non-Metallic Overfloor Raceway

T-70 cover coupler fitting: Joins cover sections of T-70, Twin-70, and TG-70. raceway cover together, International Gray.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Tee fitting for use with LDPH5 and LDS5 raceway, White, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings