Search results

Type TNC slotted wall wiring duct, 24.6mm W x 35.8mm H, 6.6' length, polyphenylene ether + high impact polystyrene (PPE + HIPS), light gray, base and cover packaged together.

Category: Special Purpose Wire Duct

Panduct® type G wide slot wiring duct, 2.5 W x 3 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type F narrow slot wiring duct, 3 W x 3 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Wiring Duct, Type G, Wide Slot, 1-1/2" W x 1" H x 6' L, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Narrow Slotted Duct, Adhesive, PVC, 1.5" X 3" X 6', SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Type TNC slotted wall wiring duct, 37.1mm W x 72.4mm H, 6.6' length, polyphenylene ether + high impact polystyrene (PPE + HIPS), light gray, base and cover packaged together.

Category: Special Purpose Wire Duct

Panduct® flush cover type D round hole wiring duct, 3 W x 3 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 1 W x 1.5 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Divider wall with screws for integral cabinet top cable routing system to enhance cable management. For 800mm wide cabinet. Color: Black

Category: Wall Duct Dividers

NAR SLOT DUCT PVC 1.5IN X3IN X6FT BL 6FT, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

FiberRunner® Spill-Over Junction Fitting with 4x4 Exit, Yellow

Category: Wireway Box Connectors

2" Corner Strip For PanelMax™ DIN Rail Wiring Duct

Category: Wire Duct Clips / Retainers

Used to carry the cables vertically to the front or the back of equipment racks throughout the system. Accepts cover C2YL6. Extra supports required when used in horizontal applications. Cover sold separately, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° horizontal turn from a straight horizontal run. Cover included. Yellow.

Category: Wireway U-Connectors

Panduct® PanelMax™ Corner Strip For DIN Rail Wiring Duct, 3" Corner Strip, PVC, Light Gray

Category: Wire Duct Clips / Retainers

TG raceway divider wall. Snaps onto rails in TG raceway base to create separate channels. Must use wire retainers to ensure channel separation per UL/CSA.

Category: Wall Duct Dividers

2 x 2 Vertical Tee, FiberRunner System, Yellow

Category: Wireway Cutoff Fittings

End Cap, 2 x 2 Inch, Non-Metallic, Used on Opend Ends of Channel

Category: Wireway Closure Plates

TG raceway divider wall. Snaps onto rails in TG raceway rase to create separate channels. Must use wire retainers to ensure channel separation per UL/CSA.

Category: Wall Duct Dividers

Panduct® PanelMax™ Corner Strip For DIN Rail Wiring Duct, 4" Corner Strip, PVC, Light Gray

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 2.0" (50 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

Intersection Bend Radius Control, 2" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 2.0" (50 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

Panduct® type G wide slot wiring duct, 1.5 W x 1.5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

OVERHEAD BRACKET TRAPEZE 12IN EZ EA

Category: Wire Duct Clips / Retainers